Hygroscopic Properties and Respiratory System Deposition Behavior of Particulate Matter Emitted By Mining and Smelting Operations

Abstract

This study examines size-resolved physicochemical data for particles sampled near mining and smelting operations and a background urban site in Arizona with a focus on how hygroscopic growth impacts particle deposition behavior. Particles with aerodynamic diameters between 0.056 – 18 μm were collected at three sites: (i) an active smelter operation in Hayden, AZ, (ii) a legacy mining site with extensive mine tailings in Iron King, AZ, and (iii) an urban site, inner-city Tucson, AZ. Mass size distributions of As and Pb exhibit bimodal profiles with a dominant peak between 0.32-0.56 μm and a smaller mode in the coarse range (> 3 μm). The hygroscopicity profile did not exhibit the same peaks owing to dependence on other chemical constituents. Sub-micrometer particles were generally more hygroscopic than super-micrometer ones at all three sites with finite water-uptake ability at all sites and particle sizes examined. Model calculations at a relative humidity of 99.5% reveal significant respiratory system particle deposition enhancements at sizes with the largest concentrations of toxic contaminants. Between dry diameters of 0.32 and 0.56 μm, for instance, ICRP and MPPD models predict deposition fraction enhancements of 171%-261% and 33%-63%, respectively, at the three sites.

Characteristics of nanoparticle formation and hazardous air pollutants emitted by 3D printer operations: from emission to inhalation

“…The primary particle size is critical, since the deposition fraction and deposited areas in the human respiratory system differ depending on particle size. 43 The median primary particle size Fig. 1 Real-time measurement of the particle number concentrations as a function of particle diameter and time.…”

On the Morphology and Composition of Particulate Matter in an Urban Environment

“…Some air pollutants are locally generated while others are transported by wind and cover very long distances after emission from their source point. There is a clear association between the concentration of PM and health effects (Dockery et al , 1993; Wilson and Suh, 1997; Kunzly et al , 2000; Alam et al , 2011), particularly the fine PM fraction that can more easily penetrate into the lungs and cause respiratory diseases (Schwartz et al , 1996; Youn et al , 2016). Black carbon (BC) in particular can damage the cells of the human body and possibily carcinogenic to humans (Baan, 2007).…”

Impacts of climate and synoptic fluctuations on dust storm activity over the Middle East

“…Dust is the most abundant aerosol type globally on a mass basis and affects climate, the water cycle, public health and welfare, and vegetation (Bollen et al, 2010; Manninen et al, 2013; Gibson, 2015; Matyssek et al, 2015; Madala et al, 2016; Carugno et al, 2016; Morelli et al, 2016; Raspanti et al, 2016; Youn et al, 2016; Soltani et al, 2017). Large deserts in the Middle East, such as those in Saudi Arabia, Iraq, and Syria, are major sources of dust where in recent years dust storm frequency and intensity has increased (Alam et al, 2014a; Boloorani et al, 2014; Jish Prakash et al, 2015; Shalaby et al, 2015; Gharibzadeh et al, 2017).…”