Influence of backing materials towards the fatigue strength of butt-welded joints

Abstract

The purpose of this study is to investigate the fatigue strength of butt-welded joints with special attention paid to employing different kinds of backing plates. The effect of the undermatched weld was also considered. Four different cases of backing scenarios for butt-welded specimens such as steel backing, ceramic backing, CMT (no backing by cold metal transfer) and UM (under-matched welded specimen) were investigated. A series of fatigue tests was performed to compare the fatigue strength of butt-welded joints with respect to different backing scenarios. Effective notch stress was used for the interpretation of fatigue strength of butt-welded specimens with backing plates based on finite element analyses for calculating fatigue notch factors. When results were presented from the effective notch stress, all backing scenarios considered in this study exhibited the fatigue strengths corresponding to the FAT 225 curve. From the experimental results of this study, it was determined that the fatigue strengths of butt-welded joints were found to be in the order of CMT, ceramic backing, UM, and steel backing. No significant decrease in fatigue strength, however, was observed when backing plates were steel backing and ceramic backing types.

Fatigue properties of 6061-T6 aluminum alloy butt joints processed by vacuum brazing and tungsten inert gas welding

“…Butt welding has numerous advantages such as good connection efficiency, easy workmanship, and weight reduction. 3 The wide range of application of butt welds in various structures provides researchers a large scope for analyzing their behavior under various loading conditions. 4 The frequently preferred process for welding aluminum alloy is tungsten inert gas (TIG) welding owing to its relative simplicity and cost.…”

Through arc sensing for reciprocating wire feed gas metal arc welding

“…11 Moreover, the fatigue strength could be improved by performing the root welds without a backing plate, compared with those with a steel backing plate. 12…”