Influence of Local Weather Conditions on Ventilation of a Pitched Wooden Roof

Accurate values for the climatic conditions in an air cavity, hereby called the microclimate, are crucial when calculating and simulating the performance of a ventilated roof and façade system. The climatic stress of its components and their mould and rot potential influence the long-term durability of the roof or façade. A scoping study is conducted to gain an overview on research and the scientific literature on the microclimate of air cavities in ventilated roofing and claddings in Nordic climates. From the body of the research literature, 21 scientific works were of particular interest, and their findings are summarized. The review shows that only a limited number of studies discuss the microclimate of air cavities. Roofs are discussed to a greater and more varied degree compared to façades and air cavities behind solar panels. However, the results cannot be compared and validated against each other to generally describe the microclimate of air cavities, as the surveyed papers approach the subject differently. This knowledge gap indicates that calculations and simulations can be performed without knowing whether the results represent reality. If the structure of ventilated roof and façade systems are only designed based on experience, it can be difficult to be proactive and adapt to future climate changes. Further studies are needed to determine the relation between the exterior climate and the air cavity microclimate, so that future climate predictions can be used to simulate the long-term performance of ventilated roof and façade systems.

show abstract

Microclimate of Air Cavities in Ventilated Roof and Façade Systems in Nordic Climates

Ingebretsen

Andenæs

Kvande

2022

Buildings

View full text Add to dashboard Cite

show abstract

Microclimate and Mould Growth Potential of Air Cavities in Ventilated Wooden Façade and Roof Systems—Case Studies from Norway

et al. 2022

View full text Add to dashboard Cite

Harsh climatic conditions in the Nordic countries are being worsened by climate change, which increases the moisture load on building façades. New types of defects are being observed in air cavities in well-designed and well-built wooden façades and roofs. More knowledge is required on the microclimatic conditions in air cavities and roofs, and their implications for organic growth and biological deterioration. The present study collects and presents sensor data from three buildings in Norway. Collected air temperature, air humidity, and wood moisture data are compared to mould growth criteria found in scientific literature, building physics software, and national and international standards. The data shows great differences in air cavity microclimates between the case buildings and between different sensor positions within the instrumented air cavities. Air cavity temperatures are found to be lower than exterior temperatures for a substantial portion of the time. For tall buildings, the vertical positioning of a sensor influences the data more than the orientation of the façade. All three buildings feature monitoring positions with both acceptable and critically high levels of moisture to indicate mould risk. There is great variation in the estimated risk of mould growth according to the different criteria. The study indicates that the coastal climate in the south-west of Norway presents a challenge in terms of resilient building design to avoid mould growth in the ventilated air cavity.

show abstract

Determining the Vapour Resistance of Breather Membrane Adhesive Joints

et al. 2022

View full text Add to dashboard Cite

Due to increasingly stringent requirements, tapes and adhesive joints are a commonly used method to ensure tightness and energy efficiency in modern building envelopes. Previous studies have researched and tested properties such as the strength and tightness of adhesive joints. So far, water vapour resistance has been neglected. This article aims to determine the vapour resistance and shed light on possible consequences of vapour-tight adhesive joints in breather membranes used in roof assemblies. Laboratory measurements of vapour resistance were conducted according to NS-EN ISO 12572:2016, known as the cup method. Eleven products of breather membranes were tested. Results from the laboratory measurements were used to evaluate the impact of vapour-resistant adhesive joints related to the drying of built-in moisture. The simulation programs WUFI 2D and WUFI Mould Index VTT were used to model scenarios for moisture transport and risk for mould growth. Laboratory results show that the vapour resistance of breather membrane adhesive joints varies from 1.1 to 32 m in sd-value. Three of the tested products have a vapour resistance larger than 10 m, while four products have an sd-value less than 2.0 m. The sd-values of the membranes themselves range between 0.027 and 0.20 m. All tested adhesive joints are considerably more vapour tight than the Norwegian recommended value for breather membranes (<0.5 m). However, the mould growth analysis shows that the risk of mould growth is low in most practical cases, except when using adhesive joints with the highest vapour resistance in roofs assembled during autumn.

show abstract

scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.

Contact Info

customersupport@researchsolutions.com

10624 S. Eastern Ave., Ste. A-614

Henderson, NV 89052, USA

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Blog Terms and Conditions API Terms Privacy Policy Contact Cookie Preferences Do Not Sell or Share My Personal Information

Made with 💙 for researchers

Part of the Research Solutions Family.

Influence of Local Weather Conditions on Ventilation of a Pitched Wooden Roof

Cited by 3 publications

References 7 publications

Microclimate of Air Cavities in Ventilated Roof and Façade Systems in Nordic Climates

Microclimate of Air Cavities in Ventilated Roof and Façade Systems in Nordic Climates

Microclimate and Mould Growth Potential of Air Cavities in Ventilated Wooden Façade and Roof Systems—Case Studies from Norway

Determining the Vapour Resistance of Breather Membrane Adhesive Joints

Contact Info

Product

Resources

About