Influence of the Working Parameters of the Chassis Dynamometer on the Assessment of Tuning of Dual-Fuel Systems

Abstract

The article presents the justification for the necessity to use chassis dynamometers in the tuning process of dual-fuel trucks. The research system used and the research methodology are presented. The research results present the approach to solving problems related to setting the technical (physical) data of the tested vehicle on the dynamometer, selection of the vehicle engine operation range, the impact of the value of the forced load on the vehicle drive axle, selection of the dyno operation mode for the expected tasks and the impact of the correctness of the selection of the scope of the analysis of data on losses in the drive system. The article shows the above-mentioned influence on the test results on the dynamometer and on the tuning results. The article closes with a conclusion detailing prospects for developing the presented results.

A Study on Utilization of High-Ratio Biodiesel and Pure Biodiesel in Advanced Vehicle Technologies

“…Energies 2023, 16, x FOR PEER REVIEW 9 of chassis dynamometer to measure performance can be considered to be an alternati method to evaluate the effect of a fuel on engine tuning, although it cannot be a standar ized test. However, some possibility of errors must be eliminated to achieve good repe ability during engine tuning [26]. A lower heating value was measured for each test fuel as shown in Table 2.…”

The concept of a mobile automated diagnostic and dynamometer station for heavy trucks

“…More on this topic the author of this article wrote as part of the work [8]. It should be emphasized that this article is a general aid to the recipient.…”