Integrated Fiber Ring Laser Temperature Sensor Based on Vernier Effect with Lyot–Sagnac Interferometer

Abstract

The Vernier effect created using an incorporated Lyot–Sagnac loop is used to create an ultra-high sensitivity temperature sensor based on a ring laser cavity. Unlike standard double Sagnac loop systems, the proposed sensor is fused into a single Sagnac loop by adjusting the welding angle between two polarization-maintaining fibers (PMFs) to achieve effective temperature sensitivity amplification. The PMFs are separated into two arms of 0.8 m and 1 m in length, with a 45° angle difference between the fast axes. The sensor’s performance is examined both theoretically and experimentally. The experimental results reveal that the Vernier amplification effect can be achieved via PMF rotating shaft welding. The temperature sensitivity in the laser cavity can reach 2.391 nm/°C, which is increased by a factor of more than eight times compared with a single Sagnac loop structure (0.298 nm/°C) with a length of 0.8 m without the Vernier effect at temperatures ranging from 20 °C to 30 °C. Furthermore, unlike traditional optical fiber sensing that uses a broadband light source (BBS) for detection, which causes issues such as low signal-to-noise ratio and broad bandwidth, the Sagnac loop can be employed as a filter by inserting itself into the fiber ring laser (FRL) cavity. When the external parameters change, the laser is offset by the interference general modulation, allowing the external temperature to be monitored. The superior performance of signal-to-noise ratios of up to 50 dB and bandwidths of less than 0.2 nm is achieved. The proposed sensor has a simple structure and high sensitivity and is expected to play a role in biological cell activity monitoring.

Highly Sensitive Balloon-like Fiber Interferometer Based on Ethanol Coated for Temperature Measurement

“…In the last few years, FOTSs based on interferometric principles, including Fabry–Pérot interferometers (FPI) [ 13 , 14 , 15 ], Mach–Zehnder interferometers (MZI) [ 16 , 17 , 18 ], Michaelson interferometers (MI) [ 19 , 20 ], and Sagnac interferometers (SI) [ 21 , 22 , 23 ], have become more and more popular because of the advantages of high sensitivity and the ability to maintain a high level of stability and reproducibility in harsh environments. Among them, the most favored structure for building various types of fiber-optic sensors is the MZI.…”