Metamaterials are composed of periodic subwavelength metallic/dielectric structures that resonantly couple to the electric and magnetic fields of the incident electromagnetic waves, exhibiting unprecedented properties which are most typical within the context of the electromagnetic domain. However, the practical application of metamaterials is found challenging due to the high losses, strong dispersion associated with the resonant responses, and the difficulty in the fabrication of nanoscale 3D structures. The optical metasurface is termed as 2D metamaterials that inherent all of the properties of metamaterials and also provide a solution to the limitation of the conventional metamaterials. Over the past few years, metasurfaces; have been employed for the design and fabrication of optical elements and systems with abilities that surpass the performance of conventional diffractive optical elements. Metasurfaces can be fabricated using standard lithography and nanoimprinting methods, which is easier campared to the fabrication of the counterpart 3 days metamaterials. In this review article, the progress of the research on metasurfaces is illustrated. Concepts of anomalous reflection and refraction, applications of metasurfaces with the Pancharatanm-Berry Phase, and Huygens metasurface are discussed. The development of soft metasurface opens up a new dimension of application zone in conformal or wearable photonics. The progress of soft metasurface has also been discussed in this review. Meta-devices that are being developed with the principle of the shaping of wavefronts are elucidated in this review. Furthermore, it has been established that properties of novel optical metasurface can be modulated by the change in mechanical, electrical, or optical stimuli which leads to the development of dynamic metasurface. Research thrusts over the area of tunable metasurface has been reviewed in this article. Over the recent year, it has been found that optical fibers and metasurface are coagulated for the development of optical devices with the advantages of both domains. The metasurface with lab-on fiber-based devices is being discussed in this review paper. Finally, research trends, challenges, and future scope of the work are summarized in the conclusion part of the article.‬‬‬‬‬‬‬

A new temperature fiber ring laser (FRL) sensor based on a cascaded Sagnac loops fiber structure is proposed and experimentally demonstrated. The optical FRL sensor consists of cascaded Sagnac loops by inserting two polarization-maintaining optical fibers (PMF) with slightly different lengths. PMF with length of 56 cm and 75 cm are used in Sagnac loops as a filter and sensing unit in laser cavity. The working principle of the sensor is based on the phase shift (θ) caused by birefringence between two principal polarization modes and enhance the sensitivity by constructing a Vernier-scale. In an appropriate temperature range (25℃-31℃), the detection sensitivity of FRL sensor based on a cascaded Sagnac structure is significantly higher than other FRL sensors. Thanks to the laser sensing system, the sensitivity can be modulated by changing the free spectral range (FSR). The experimental results show that the temperature sensitivity of the cascade Sagnac structure sensor is-4.031 nm / ° C, which is five times higher than that of FRL sensor base on the single Sagnac structure.

Recently, two special photonic jets, photonic hooks and twin photonic jets, have been proposed to deal with complex conditions in nanoscale manipulation. Photonic hooks are generated by a single light plane wave and an asymmetric microparticle, while the twin photonic jets are produced by two incident light beams. In this letter, we presented and demonstrate a method to combine photonic hooks and twin photonic jets. A single light plane wave and a symmetric microparticle, twin-ellipse microcylinder, are used in this research. The curvature degree, length and maximum E 2 filed enhancement of twin photonic hooks are varied significantly, with the change of refractive indices and shape of twin-ellipse microcylinder. And a liquid-immersed core-shell is built to achieve a flexible tunability. _____________________________ a) Electronic

It is demonstrated that in this paper a peanut shaped structure cascaded with up-taper fiber structure can realize the inter mode interference between the Erbium doped fiber (EDF) core mode and cladding modes in fiber ring laser (FRL). A simple and inexpensive Mach-Zehnder interferometer (MZI) based on this structure is proposed. Shown from experimental results, the optical intensity of the core mode can be coupled into the cladding modes in the first peanut-shaped structure. Then, the light in the cladding modes can be recoupled into the core mode in the up-taper structure. A high-quality interference spectrum with a signal to noise ratio about 50 dB was observed. Besides, the structure exhibits good mechanical stability when compared to MZIs based on taper or offset structure. The temperature sensitivity of the FRL sensor is 301 pm/℃ and the RI sensitivity is 156 nm/RIU. This kind of MZI will have potential applications in remote sensing technique and the development of life and health.

An optical fiber ring laser (FRL) cavity-based sensitive temperature and salinity sensor is proposed and experimentally demonstrated. The sensor consists of a Sagnac loop with a waist of 15 µm and a total length of 30 cm made of tapered polarization-maintaining fiber (PMF). Sagnac loop dual parameter sensing was theoretically modeled and presented. The salinity sensitivity of 0.173 nm/‰ was made possible by the efficient interaction between the tapered PMF cladding mode and the external refractive index. In addition, temperature sensitivity of 0.306 nm/°C was achieved through ultrahigh birefringence of PMF. Apart from that, the previous sensing system used a broadband light source (BBS) as the input light, resulting in a wide bandwidth and a poor signal-to-noise ratio (SNR). The Sagnac loop integrated into the FRL system can achieve a high SNR of approximately 50 dB and a narrow bandwidth of 0.15 nm while serving as the filter and sensor head. Additionally, the developed sensor has the advantages of simple design, low cost, and easy fabrication. It can also extend sensing distance indefinitely within a given range, which is anticipated to have positive effects on the testing of marine environments in laboratories.