Integrated Piezoresistive Force and Position Detection Sensors for Micro-Handling Applications

Abstract

This paper presents two integrated piezoresistive sensors capable of detecting simultaneously both the contact force and the contact position of a micro-object in micro-handling applications. The first sensor detects the 1-D contact position in vertical direction along a contact surface. The second sensor extends the sensing principle and detects the contact position on a 2-D contact surface. The devices combine the outputs of two groups of piezoresistors in Wheatstone bridge configurations, allowing the computation of the contact force and the contact position. The sensors are fabricated with an IC-compatible process and can be integrated in micro-handling tools such as micro-grippers. The two devices are characterized by applying forces onto the contact surface at pre-defined positions. With an applied contact force ∼1 mN, the first sensor has a force resolution of 1 µN and a vertical position detection accuracy of 2-3 µm. The estimated force range detectable is 3 mN and a sensitivity of 2.8 V/N is obtained with an effective supply voltage of 177 mV across the Wheatstone bridge. The second sensor has a force detection range up to 3 mN with a resolution of 20 µN under a measured noise of 30 µV. The theoretical spatial resolution is ∼5 µm in both x and y directions with a contact force of 1 mN. The devices are designed to handle micro-objects with sizes of 25-250 µm. The concept and the principle of the device are not limited to applications in micro-grippers and can be used in other micro-handling tools. [2012-0001]

Towards a Comprehensive and Robust Micromanipulation System with Force-Sensing and VR Capabilities

“…With an embedded force sensing unit, the system is capable of ensuring the threshold force is never surpassed and in the case of a biological medium, the object being manipulated retains its properties and viability. Multiple force sensing methods have been shown for micromanipulation or microrobotic applications, such as piezoelectric/piezoresistive [ 21 , 22 , 23 , 24 ], atomic force microscope (AFM) [ 25 , 26 ], vision-based [ 11 , 27 ], and capacitive [ 28 , 29 ]. From these methods, a vision-based force sensor modality is selected for use here since it is able to overcome many of the drawbacks other sensors, such as high costs and difficult integration with micromanipulation systems (AFM sensors), complicated circuitry (capacitive sensors), and temperature sensitivity (piezoresistive sensors).…”

Dynamics Identification and Contact Force Estimation of Multi DoF Robot Based on Base Frame Force Sensor

“…Traditional force detection methods often use force sensors (4) . However, the measurement range of the force sensor is limited.…”

Chopper-stabilized Multipath Instrumentation Amplifier with Output Voltage Offset Compensation Using R-2R Digital-to-Analog Converter

“…Resistive MEMS sensors are used in various applications such as strain gauges, pressure sensors, acceleration sensors, and force sensors. (1)(2)(3)(4)(5) For the implementation of a highprecision sensor interface circuit for these high-performance resistive sensors, low noise, low offset, and high input impedance are required. There are two general architectures for a resistive sensor interface circuit: a current-feedback instrumentation amplifier (CFIA) and a 3-opamp voltage feedback instrumentation amplifier (IA).…”