Investigation on the influence of fiber fraction and orientation on the mechanical properties of fiber‐reinforced concrete slabs

Abstract

The current work examines an experimental and numerical investigation into how steel fiber reinforced concrete (SFRC) slab failure behavior is influenced by fiber orientation by pouring concrete in slab elements. Double‐ended hooked steel fibers with an aspect ratio of 50 were used in varying percentages by volume. Fresh and hardened properties of SFRC were determined based on slump flow, V‐funnel, L‐box, J‐ring test, compression, and flexure tests. The effects of different pouring/casting locations (center and corner), fiber orientation, and fiber content (0, 0.5%, and 1.0%) on the crack pattern of the SFRC slab were observed. While casting, the concrete was allowed to flow through a 30° chute angle to enhance the flowability of concrete. The SFRC slabs without fiber reinforcement undergo brittle failure without forming any prior micro cracks. Slabs with fibers experience ductile failure and show significant post‐cracking strength. The concrete's pouring position only affects the failure crack's inclination for the given workability. In the case of the corner cast slab, the crack was propagated from one edge to the opposite edge of the slab in a straight line and split into two halves. This crack pattern suggested that the fiber distribution was concentrated in half of the slab part in which the pouring corner was located. Adding 0.5% and 1.0% fiber content increased the load‐carrying capacity of slabs by 1.31 and 2.15 times, respectively. In addition to fiber content, the pouring position of concrete also made a difference in the load‐carrying capacity of slabs. The concrete pouring in the slab from the center position with 0.5% and 1.0% fiber content has 17.2% and 40% more load‐carrying capacity compared to the concrete poured in the slab from the corner position with the same fiber content. The deflection and load‐carrying capacity obtained through finite element modeling (FEM) fit the experimental results well.