Lean-Stratified Combustion System with Miller Cycle for Downsized Boosted Application - Part I

Abstract

<div class="section abstract"><div class="htmlview paragraph">Automotive manufacturers relentlessly explore engine technology combinations to achieve reduced fuel consumption under continued regulatory, societal and economic pressures. For example, technologies enabling advanced combustion modes, increased expansion to effective compression ratio, and reduced parasitics continue to be developed and integrated within conventional and hybrid propulsion strategies across the industry. A high-efficiency gasoline engine capable for use in conventional or hybrid electric vehicle platforms is highly desirable. This paper is the first to two papers describing the development of a combustion system combining lean-stratified combustion with Miller cycle for downsized boosted applications. The work was completed under a multi-year US DOE project. The goal was to define a light-duty engine package capable of achieving a 35% fuel economy improvement at US Tier 3 emission standards over a naturally aspirated stoichiometric baseline vehicle. A multi-mode combustion system was developed enabling highly efficient lean-stratified operation at light-load and stoichiometric Miller-cycle operation at mid- to high-loads. Some of the unique challenges in synergistically combining the two concepts are highlighted in this paper. A central direct-injection four-valve layout was designed with high-tumble ports and a bowl-in-piston capable of stable operation under highly dilute (lean plus EGR) mixtures when properly matched to fuel spray characteristics, a multiple-injection strategy, and a high-energy ignition system. Other challenges specific to meeting exhaust emissions requirements with a high-efficiency engine are also explored in this study. In this Part 1 of the paper, the single-cylinder combustion system design, analysis, and testing is described. Multi-cylinder engine system design, analysis and development is described in Part 2 of the paper [<span class="xref">1</span>].</div></div>

Materials Design for the Improvement of SiC Field Effect Gas Sensor performance in High Temperature Process Control applications

“…Further efficiency enhancements of the gasoline Spark Ignition (SI) engine, which currently dominates the global light-duty vehicle segment, generally involves lean-burn operation, as lean combustion (using air-to-fuel ratios higher than the stoichiometric ratio, i.e., λ > 1) and high compression ratios are well known to improve the efficiency of gasoline SI engines [82]. In e.g., combining lean combustion and Variable Valve Timing (VVT) Miller cycle technology at low-to-medium loads and homogeneous stoichiometric operation at higher loads, an improvement in Brake-Specific Fuel Consumption (BSFC) of > 30% under lean conditions over the all-stoichiometric operation has been demonstrated [83,84]. [78][79][80]).…”

Theoretical and experimental evaluation of electric coolant pump benefits in real driving cycles

“…Until then, there are several opportunities to improve the efficiency of current transportation systems, i.e., internal combustion engines. These can be summarized but are not limited to combustion improvement [3,4], use of biofuels [5], Waste Heat Recovery (WHR) systems [6][7][8], and engine downsizing [9]. This latter is particularly relevant regarding mechanical efficiency improvement, the reduction of parasitic loss [10] and the decrease of propulsion power.…”

Ultra-Lean Premixed Turbulent Combustion: Challenges of RANS Modelling

“…The spark-ignition (SI) engine represents one of the most interesting and feasible solutions in powertrain technologies to meet such ambitious targets. Currently, SI engines are under continuous improvement to achieve ever increasing thermal efficiencies as well as near-zero pollutant emissions [5][6][7]. In this framework, the major challenge is to operate the engine with homogeneous ultra-lean premixed (HULP) mixtures, which have the potential to minimize thermal losses, avoid soot formation and cut NO x emissions, paving the way for a further reduction in size and costs of the after-treatment system [8,9].…”