Maker Buoy Variants for Water Level Monitoring and Tracking Drifting Objects in Remote Areas of Greenland

Abstract

Meltwater runoff from the Greenland Ice Sheet changes water levels in glacial lakes and can lead to glacial lake outburst flooding (GLOF) events that threaten lives and property. Icebergs produced at Greenland’s marine terminating glaciers drift into Baffin Bay and the North Atlantic, where they can threaten shipping and offshore installations. Thus, monitoring glacial lake water levels and the drift of icebergs can enhance safety and aid in the scientific studies of glacial hydrology and iceberg-ocean interactions. The Maker Buoy was originally designed as a low-cost and open source sensor to monitor surface ocean currents. The open source framework, low-cost components, rugged construction and affordable satellite data transmission capabilities make it easy to customize for environmental monitoring in remote areas and under harsh conditions. Here, we present two such Maker Buoy variants that were developed to monitor water level in an ice-infested glacial lake in southern Greenland and to track drifting icebergs and moorings in the Vaigat Strait (Northwest Greenland). We describe the construction of each design variant, methods to access data in the field without an internet connection, and deployments in Greenland in summer 2019. The successful deployments of each Maker Buoy variant suggest that they may also be useful in operational iceberg management strategies and in GLOF monitoring programs.

Cryologger Ice Tracking Beacon: A Low-Cost, Open-Source Platform for Tracking Icebergs and Ice Islands

“…The Cryologger is a data logging and telemetry platform based on Arduino open-source hardware and software ( ). Over recent years, the Arduino has seen widespread adoption by scientists for a wide range of research applications [ 29 , 30 , 31 , 32 , 33 , 34 , 35 ]. Advances in Arduino sensor technologies continue to provide new ways to measure, monitor, and study the environment [ 36 ].…”

“…Some recent studies [ 29 , 30 ] have started to explore the use of low-cost technologies to study the drift of icebergs. The application of such technologies has the potential to greatly reduce the cost of monitoring the drift of icebergs, as reliance on expensive and proprietary commercial tracking devices presents a significant barrier to the establishment of widespread monitoring networks.…”

Low-cost Oceanographic Buoy for Evaluating the Mechanical Resistance of a Water Cherenkov Detector to be deployed on a high-altitude Natural Lake in Peru.

“…To address this issue, the use of low-cost sensors that utilise common open-source hardware and post-processing software is proposed [7,8]. In this work, a low-cost oceanographic buoy (with a good cost-effectiveness relationship) is described, with an approximate cost of 230 USD, based on an MPU6050 IMU (Inertial Measurement Unit) and implemented using the Atmega2560 microcontroller on the open-source Arduino platform.…”

Study and Design of a Sensor System for the Detection of Illicit Discharges in Sewers and Water Bodies

“…With a limit switch to generate alarms or other electronic devices to know the liquid level. Carlson et al (2020) presented a buoy to monitor glaciers' meltdown and changes in glacial lakes' water levels. The system uses an Adafruit Feather M0 as a microcontroller, a Global Position System (GPS) to know the position of the buoy, an inertial motion unit sensor to see the acceleration of the buoy's position, batteries to power the system and solar panels to provide energy to batteries.…”