Measurement of Residual Stresses in the Cold-Rolled Fe-Ni-Mn/Invar Thermo-Bimetallic Plate

Abstract

The paper presents a method for measuring residual stresses in normal thermo-bimetal Fe-Ni-Mn/Invar strips with a thickness of 0.76 mm. For this purpose, a setup was designed which permits to remove layers from a strip substrate by electrochemical etching. Residual stresses in the directions that are longitudinal and transversal to rolling are determined by the curvature method based on the layer growing/removing techniques. As a reference, residual stresses were also determined by hole-drilling technique. Tensile and compressive residual stresses arose both in active and in passive layers and were considerably higher when determined by the hole-drilling technique.