Measurement Process of MOSFET Device Parameters with VEE Pro Software for DP4T RF Switch

Abstract

To design a Double-Pole Four-Throw (DP4T) RF switch, measurement of device parameters is required. In this DP4T RF switch CMOS is a unit cell, so with a thin oxide layer of thickness 628 Å which is measured optically. Some of the material parameters were found by the curve drawn between Capacitance versus Voltage (C-V) and Capacitance versus Frequency (C-F) with the application of Visual Engineering Environment Programming (VEE Pro). To perform the measurement processing at a distance, from the hazardous room, we use VEE Pro software. In this research, to acquire a fine result for RF MOSFET, we vary the voltage with minor increments and perform the measurements by vary the applying voltage from +5 V to -5 V and then back to +5 V again and then save this result in a data sheet with respect to temperature, voltage and frequency using this program. We have investigated the characteristics of RF MOSFET, which will be used for the wireless telecommunication systems.

Programming the Measurement System by using VEE Pro to Determine Cyclic I-V Characteristics: Resistive Switching Device Application

“…So, this software packages allows the user for data recording, visualization, and basic calculations. VEE Pro is one of the most important graphical programming environment and generally used for building test systems and computation for researcher's specific demands [1,2,7,[11][12][13][14].…”

Multi Sensor-Based Obstacle Avoidance Algorithm in Visual Engineering Environment

“…The proposed obstacle avoidance algorithm is then simulated in a program built using Visual Engineering Environment (VEE) software [22] by Agilent (now owned by Keysight). VEE software is, first and foremost, not a simulation software, but is optimized for use with electronic instruments [23]. However, its graphical programming feature can be used to build user-specific graphical user interface [24].…”