Mechanical and Hygroscopic Properties of Molded Pulp Products Using Different Wood-Based Cellulose Fibers

Abstract

With an increasing interest for molded pulp product (MPP) in the industry, it is important to fully understand how the manufacturing process is different from papermaking. One specific way to differentiate the processes is to compare their resulting products. As the paper industry uses several wood fibers with various pulping processes, it is interesting to compare some of these fibers, to further progress our understanding of the MPP process. In this study, six different wood fibers were used (as received) and analyzed to obtain the sample with the lowest moisture uptake and highest tensile properties. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and fiber analysis module (MorFi) observations were performed, as well as moisture uptake measurements after sorption and tensile tests. We observed significant differences between the fibers tested. Kraft fibers (bleached softwood kraft pulp (BSKP), bleached hardwood kraft pulp (BHKP), and unbleached softwood kraft pulp (USKP)) showed smoother surfaces and less non-cellulosic molecules, such as hemicellulose, lignin, and pectin, in the SEM images. Bleached chemi-thermomechanial pulp (BCTMP) and recycled pulps (R-NPM and R-CBB) both showed non-cellulosic molecules and rougher surfaces. These results were confirmed with the FTIR analysis. With kraft fibers, MPP mechanical properties were lower than non-kraft fibers. Resulting moisture uptake is in between the recycled fibers (lowest moisture uptake) and BCTMP (highest moisture uptake). The removal of non-cellulosic molecules reduces the mechanical properties of the resulting MPP. The incorporation of non-wood molecules, as found in recycled fibers, also reduces the mechanical properties, as well as moisture uptake, when compared with BCTMP.

Molded pulp products for sustainable packaging: Production rate challenges and product opportunities

“…Since the range of targeted properties is very broad, a wide range of fibrous materials have been considered for molded pulp production in various studies. Researchers have prepared molded pulp items from kraft pulps (Aguerre and Gavazzo 2016;Jacobsen 2017;Dislaire et al 2021), high-yield wood or bamboo pulps (Jacobsen 2017;Wang et al 2021), and chemi-mechanical pulps (Kirwan 2013;Zhao et al 2020;Dislaire et al 2021). As noted earlier, recycled pulps are very widely used by the molded pulp industry.…”

Properties of Bark Particleboard Bonded with Demethylated Lignin Adhesives Derived from <i>Leucaena leucocephala</i> Bark

“…Lignin-based adhesives, derived from renewable sources, are used to bond these particleboards. The bonding process is similar for all three types, but the efficiency may vary slightly due to differences in particle size [90].…”

Developing Product Sustainability Using Life Cycle Analysis: Case Study Electric Cooker Product

“…Moreover, in manufacturing, the shape, features, and properties can be made as desired (Dislaire et al, 2021). Some additives like emulsion and alum can be added to provide unique properties such as waterproofing (Zhang et al, 2022).…”