Abstract:Abstract. The effect of quenching on the mechanical properties of medium carbon steels using coconut (CW) water, pap water (PW) and spent engine oil (SPE) which have been largely considered as wastes was investigated. All specimens were normalized at a temperature of 840°C in order to remove residual stresses induced during machining operations. Various specimens were heated to ranges of 730-790°C and soaked for the range of 30-60 minutes respectively. Brinnel hardness tester was used to obtain the hardness va… Show more
The quality of steel rods used in structural applications has been subjected to continuous scrutiny by researchers in Nigeria. In this data article, the experimental data on the chemical and mechanical properties of steel rods from collapsed building sites and local steel plants have been reported. The chemical composition consisting of carbon, manganese, silicon, sulphur, phosphorus among other elements were recorded using an optical emission spectrometer. Some of the main elements were used to evaluate the carbon equivalent value and the results are reported in this article. The yield strength, ultimate tensile strength and percentage elongation were also presented as obtained from the universal testing machine. The hardness values of the steel rod samples were also presented.
The quality of steel rods used in structural applications has been subjected to continuous scrutiny by researchers in Nigeria. In this data article, the experimental data on the chemical and mechanical properties of steel rods from collapsed building sites and local steel plants have been reported. The chemical composition consisting of carbon, manganese, silicon, sulphur, phosphorus among other elements were recorded using an optical emission spectrometer. Some of the main elements were used to evaluate the carbon equivalent value and the results are reported in this article. The yield strength, ultimate tensile strength and percentage elongation were also presented as obtained from the universal testing machine. The hardness values of the steel rod samples were also presented.
“…3 b) was used for the tensile test. The yield and tensile strength were determined for each of the sample used according to Ikubanni et al, 2017 [1] . Fig.…”
Section: Experimental Design Materials and Methodsmentioning
confidence: 99%
“…The quenching media employed such as coconut water (CW), pap water (PW) and spent engine oil (SPE) have been largely considered as wastes. The data in this article are related to the research article titled “Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media” (Ikubanni et al, 2017) [1] . The article provides information on the mechanical properties evaluation of medium carbon steel quenched in different media.…”
Several wastes can be instrumental in the improvement of the mechanical properties of medium carbon steel when quenched. The quenching media employed such as coconut water (CW), pap water (PW) and spent engine oil (SPE) have been largely considered as wastes. The data in this article are related to the research article titled “Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media” (Ikubanni et al., 2017) [1]. The article provides information on the mechanical properties evaluation of medium carbon steel quenched in different media. Twenty-seven (27) samples of medium carbon steel samples were heated to temperatures of 730 °C, 760 °C and 790 °C and soaked for 30, 45 and 60 min respectively. The test results recorded include hardness value, yield strength (YS) and the ultimate tensile strength (UTS) for each of the samples at different heating temperatures and soaking time for the different quenching media.
“…Oil is a major quenchant (quenching medium), which consists of water, aqueous polymer solution, and various additives. Owing to the importance of quenching in the heat treatment process, several researchers had previously used different kinds of quenching media to improve the properties of steels ( Adeleke et al., 2018 ; Ikubanni et al. 2017 , 2018 ; Adekunle et al., 2013 ; Odusote et al., 2012 ; Ndaliman, 2006 ).…”
Quenching is one of the major processes of heat treatment of medium carbon steel that aims at improving its mechanical properties. However, the effectiveness of this process is dependent on several control factors that must be maximized to obtain optimum results in terms of hardness, yield strength, ultimate tensile strength among others. This study aims at optimizing the process of improving the mechanical properties of medium carbon steel by varying some key factors like the quenchant used (A), heat treatment temperature (B), and soaking time (C). The measured responses in this study were the hardness, yield strength (YS), and ultimate tensile strength (UTS). Optimization was conducted in two stages. The first stage dealt with the mono-optimization of process parameters using Taguchi's Signal-to-Noise (S/N) ratio. A total of nine (9) experiments were performed based on standard L9 orthogonal array because each of the three control factors has three (3) levels. The second stage was multi-objective optimization using Taguchi-based grey relational analysis (GRA). The optimal conditions for hardness, YS, and UTS were obtained at A
2
B
3
C
3
, A
3
B
2
C
3
, and A
3
B
3
C
3
, respectively. Using ANOVA as statistical analysis, it was observed that the soaking time was the main control factor for all three measured responses (31.95% contribution ratio for hardness, 62.46%, and 66.76% for YS and UTS, respectively), while the quenchant had the least contribution. Analysis of the Taguchi-based GRA revealed that the results obtained are in total conformance to that of the Taguchi method, with soaking time having the highest contribution ratio of 69.41%.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
