Modellingof Organic Photovoltaic Cells Based on an Improved Reverse Double Diode Model

Pillai, Dhanup S.; Sahoo, Bidyutprava; Ram, J. Prasanth; Laudani, Antonino; Rajasekar, N.; Sudhakar, N.

doi:10.1016/j.egypro.2017.05.228

Cited by 10 publications

(6 citation statements)

References 7 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Adopted from Pillai et al 5 Copyright (2018), with permission from Elsevier Another major type of the second generation of solar cells is amorphous silicon solar cell. Adopted from Pillai et al 5 Copyright (2018), with permission from Elsevier Another major type of the second generation of solar cells is amorphous silicon solar cell.…”

Section: Models For Second Generationmentioning

confidence: 99%

“…The two-diode model as an equivalent electrical circuit. Adopted from Pillai et al 5 Copyright (2018), with permission from Elsevier Another major type of the second generation of solar cells is amorphous silicon solar cell. It is more difficult to analyze the I-V curve of an amorphous silicon solar cell than a crystalline silicon cell.…”

Section: Models For Second Generationmentioning

confidence: 99%

“…So the limits of these energy sources turned the world's attention toward the renewable energy resources. 5 The PV cells can convert light into electricity directly. 1 Furthermore, it can be a suitable option for distributed electrification to reduce the high cost of power grid extension.…”

Section: Introductionmentioning

confidence: 99%

“…2 Among the renewable energy resources, it seems that photovoltaic (PV) energy can be known as the most important energy alternative 3,4 and it seems an effective choice to decrease harmful environmental impacts such as CO 2 emission. 5 The PV cells can convert light into electricity directly. 6 Also, they are known as an environmental choice to generate power near the load centers.…”

Section: Introductionmentioning

confidence: 99%

See 3 more Smart Citations

Generation and combination of the solar cells: A current model review

Khatibi

Astaraei

Ahmadi

2019

Energy Science & Engineering

104

View full text Add to dashboard Cite

Generally, first and second generations of photovoltaic (PV) cells are including mono‐crystalline silicon, amorphous silicon, and dye‐synthesized solar cells. Investigating the electrical current behavior of these sorts of PV cells shows that a modified multi‐ or single diode(s) model with shunt and series resistance can use as a good choice in a specific range of the current. For other constructions such as multi‐junction PV cells that consist of the third generation, the network models are the best choice. Also, the network models can be used for the first and second generations to improve the validity of model in the wider range of current. In addition to existing generations, PV array and modules, which are serial and parallel arrays of PV cells, will lead to a higher current or voltage. The main disadvantage of using these sorts of systems is their more space occupation. This problem can be solved by using the concentrated PV (CPV) systems that focus the received irradiation on a smaller surface. By considering the generated current, voltage, power, temperature effect, and financial analysis, it seems third‐generation PV systems are more efficient among all the generations. Finally, by considering the ratio of generated current on the occupied space, the CPV systems will be a better choice.

show abstract

Section: Models For Second Generationmentioning

confidence: 99%

Section: Models For Second Generationmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

See 2 more Smart Citations

Generation and combination of the solar cells: A current model review

Khatibi

Astaraei

Ahmadi

2019

Energy Science & Engineering

104

View full text Add to dashboard Cite

show abstract

“…demonstrate the electrical equivalent circuit of a single solar module. The detailed evaluations on PV modeling, challenges and its applications are addressed in detail[15][16][17].…”

mentioning

confidence: 99%

A New PV-SOFC based Hybrid topology using PI Controller for the Regulation of Voltage and Frequency Profile in an Autonomous Microgrid

2019

IJRTE

View full text Add to dashboard Cite

This paper proposes a new, reliable and efficient microgrid structure which incorporates PV arrays and SOFC interconnected via Voltage Source Inverter (VSI) as an alternative to reduce the detrimental impact of energy generation on atmosphere using fossil fuels. Inorder to meet the growing energy demands, the excessive usage of nonrenewable energy resources disregarding the environmental impacts resulted in major environmental problems. As a result the spotlight is turned towards promotion of energy production from renewable energy sources like solar, wind, tidal, geothermal etc. Taking into consideration the aforesaid concept, this paper proposes a hybrid microgrid consisting of PV-SOFC with VSI based PI controller working in an islanding mode so that voltage and frequency is maintained in their acceptable limits and the output demonstrated using Matlab/Simulink shows the efficacy of the controller in providing efficient energy which gives the lowest environmental impacts

show abstract

Dye-sensitized solar cells: from synthetic dyes to natural pigments

Bartolotta

Calogero

2020

Solar Cells and Light Management

View full text Add to dashboard Cite

Modellingof Organic Photovoltaic Cells Based on an Improved Reverse Double Diode Model

Cited by 10 publications

References 7 publications

Generation and combination of the solar cells: A current model review

Generation and combination of the solar cells: A current model review

A New PV-SOFC based Hybrid topology using PI Controller for the Regulation of Voltage and Frequency Profile in an Autonomous Microgrid

Dye-sensitized solar cells: from synthetic dyes to natural pigments

Contact Info

Product

Resources

About