Morphological characteristics and permeability evolution of deep mine gas drainage boreholes

Abstract

Structural coal has low permeability and high gas content. The increase of mining depth seriously restricts the safe mining of deep mines. Hydraulic flushing is the main means of gas extraction. The shape of the hydraulic flushing hole is an important basis to determine the pumping radius, which is widely regarded as a cylinder. However, due to the differences in the stress level, water force, friction and external moisture, the pore morphology, and permeability evolution need to be further studied. At present, the hole shape for hydraulic punching is equivalent to a cylinder in drilling design and evaluation, which is one of the important bases to determine the effective extraction radius. However, the hole shape is affected by many factors, so the scientific equivalent to a cylinder remains to be discussed. The BR-PKN equation describing the hole shape is established by introducing and combining the Bergmark–Roos equation and PKN model, and the hole’s shape is shown by MATLAB. To verify its accuracy, YZD18.5 is used as an onsite logging tool for data acquisition and analysis, and the hole section is drawn. The BR-PKN equation and permeability evolution model are simulated by COMSOL Multiphysics, and the permeability evolution law of conventional cylinder with hydraulic flushing is compared and analyzed. The results show that 1) the shape of the hydraulic punch hole is ellipsoid with three different axes, and its horizontal section is approximately an ellipse; 2) within the influence range of quasi-ellipsoid holes, the permeability changes in the long and short axis of quasi-ellipsoid holes are similar. The permeability evolution curve of the coal first increases, then decreases, and finally, flattens with the increase of distance from borehole, and the permeability of the coal body increases with the extension of extraction time); 3) the permeability of the equivalent ellipsoid pore decreases with the increase in coal water content. The effective radius in the long and short axes of the minimum cross section of the quasi-ellipsoid hole is 0.89 and 0.95 times the effective extraction radius of the equivalent cylinder, which provides a basis for a drilling layout.

Study and application of reasonable parameters for hydraulic punching of layer penetration boreholes in Changping Coal Mine

“…Hydraulic punching is a widely used hydraulic permeability enhancement measure in soft and low permeability coal seams. [6][7][8] For a long time, many scholars have conducted extensive research on hydraulic pressure relief and transparency enhancement technologies and processes. Wu et al 9 analyzed the technical principle of hydraulic antireflection measures, combined with 3DEC to simulate the fracturing effects under different water pressures, different fracturing times and different in situ stresses, and verified that hydraulic fracturing has a positive impact on gas drainage.…”

“…It mainly includes measures such as hydraulic extrusion, hydraulic fracturing, hydraulic cutting, hydraulic punching, and hydraulic expansion. Hydraulic punching is a widely used hydraulic permeability enhancement measure in soft and low permeability coal seams 6–8 …”