Novel mechanical vapor recompression‐assisted evaporation process for improving energy efficiency in pulp and paper industry

Abstract

In the pulp and paper industry, black liquor, which is a biomass resource, is burned to produce electricity. Black liquor is concentrated to 21 wt% water through an evaporator before being burned in a boiler. For the evaporator, a multiple-effect evaporator (MEE) is mainly used, but it requires a large amount of energy and cost. Therefore, it is crucial to reduce energy and cost of evaporation process. Hence, this study suggested a novel process model that integrated mechanical vapor recompression (MVR) with MEE to increase the energy efficiency. The suggested MVR-assisted evaporation process was composed of preheating and evaporation processes to effectively concentrate black liquor. In addition, it reduced the steam consumption of MEE by using MVR, which uses relatively inexpensive electric energy in the pre-evaporation process. In the simulation results, the steam, electricity consumption, and the latent heat recovered from the secondary vapor of the suggested process were quantitatively analyzed to verify the energy efficiency. The results indicate that the proposed process increases substantial energy efficiency compared to the conventional process. Then, the appropriateness of the suggested process was evaluated by the techno-economic analysis. The total annualized cost (TAC) is determined for both current and potential future economic benefits. TAC of the MVR-assisted MEE configuration can be reduced by up to 77.54%.

Electrochemical C−H/C−C Bond Oxygenation: A Potential Technology for Plastic Depolymerization

“…[181][182][183][184][185][186][187] As a result, developing a strategy to address these issues that is both efficient and affordable has been difficult. Therefore, compared to landfilling and incineration, recycling technology not only minimizes toxic elements and waste pollution on the environment, [188][189][190] but it can also produce novel products with good mechanical and physical features. Due to their processing-related blending with other plastics and additives, these materials are not simple to recycle.…”

Novel waste heat and oil recovery system in the finishing treatment of the textile process for cleaner production with economic improvement

“…18 It can be calculated by dividing the TCI by the net present value of the annuity factor (AF). 21 EAC…”

Enhancing the Energy Efficiency of a Black Liquor Evaporation Plant by Mechanical Vapor Recompression Integration

“…Such an arrangement is termed Mechanical Vapor Recompression (MVR); being a kind of heat pump, it is gradually being applied in distillation processes [10,11] and evaporators [12,13]. It can facilitate both evaporation operation cost decreases and unit capacity increases, both effects being desired in industrial conditions [14,15].…”