Novel Miniaturized RF MEMS Staircase Switch Matrix

Abstract

A novel implementation of wideband large switch matrices is proposed in this letter. The solution is based on staircase geometry. The approach demonstrates significant reduction in the number of control signal required compared to all existing RF MEMS switch matrix geometries, while maintaining the performance. This letter presents the design and characteristics of a semi-T switch cell and a 3 3 staircase switch matrix. The measurement of the switch matrix demonstrated excellent RF performance of maximum insertion loss of 2 dB, a return loss of better than 15 dB and an isolation higher than 40 dB for frequencies up to 40 GHz. To our knowledge, this is the first RF MEMS staircase switch matrix ever reported.Index Terms-RF MEMS, RF MEMS switch, switch matrix.

RF MEMS for Reconfigurable RF Front-End: Research in Australia

“…By taking advantage of the MEMS contact type switches, a new method that allows both the adjustment of resonant frequency and the input/output and inter-resonator coupling is presented in [5]. A three-pole filter capable to switch to three different states is designed using RF MEMS cantilever switches.Fig.…”

Spoof surface plasmon polariton‐based switch using liquid metal

“…Recently, RF switches based on Micro Electro Mechanical Systems (MEMS) technology have also been widely studied. [2][3][4][5] Compared with the PIN-based switches, the MEMS-based switches can supply higher changing speed and enough power handling, even at high frequency band. However, the cost for MEMS-based switch is relatively high.…”

“…It has the advantages of high speed and low cost while usually cannot work at high frequency band due to the materials used. Recently, RF switches based on Micro Electro Mechanical Systems (MEMS) technology have also been widely studied 2‐5 . Compared with the PIN‐based switches, the MEMS‐based switches can supply higher changing speed and enough power handling, even at high frequency band.…”

RF MEMS millimeter-wave switchable bandpass filter

“…In the millimeter-wave spectrum, RF MEMS devices [3][4][5][6][7][8][9][10][11][12], exhibit attractive characteristics in terms of high isolation, low insertion loss, low dc power consumption, and excellent linearity. RF MEMS switches have been compared comprehensively with the semiconductor switches in [13] and they showed to be optimal for millimeter-wave applications.…”