Numerical analysis of stiffener for hybrid drive unite

Abstract

Abstract. The matter of this article is a stress-strain analysis of hybrid drive prototype unit connected directly to convention Concrete Transit Mixer Gearbox. The unite was developed with intention to do field test on existing convection machines with possibility to use existing interfaces. The hybrid drive unit consists from electric and hydrostatic motor connected through addition mechanical transmission gearbox. The question is if today standard interface is good enough or need additional support a "stiffener". Two engineering design were analysed. The first one includes using the stiffener to fixate the construction of hybrid drive unite connected to the planetary gear. The second one is without the stiffener. For strain-stress analysis, a finite element software ANSYS Workbench was used.

Design of a Metro Door System and Determination of Main Loads

“…Consequently, numerous requirements must be met, namely those related to fire protection, acoustic and thermal insulation [3,5], electronic devices, reliability, availability, maintainability, safety, protection against current and various environmental conditions and loads caused by vibrations, which rise when riding on a track at various speeds [12,33]. Great emphasis is put on noise protection, as this well-known negative phenomenon is a consequence of every braking process [6,7,24,28].…”

Strength reanalysis and influence line equation of rack system drive force

“…The strength analysis of the construction showed deficiencies of the design in the pulled-out position [13]. Analyses were carried out using FEM by means of Adina software [14][15][16]. That is why it is necessary to make some changes in the construction.…”

“…By putting the relation (13) into (15) [24], depending on the position of the rack, i.e., position in the first or second field (Fig. 8).…”

Directions of Development of Adaptive Systems to the Operating Conditions of Mobile Wood Chopping Machines with Low Power Engines

“…The equipment shredding plant materials is being developed in many directions. They include research on cutting mechanisms [19,20,21] ovation in engines -mostly regarding combustion engines [22,23]. There are alternative types of fuel [14,[24][25][26][27][28], innovative injection systems [17] and exhaust after treatment systems.…”