Numerical approach for solving rigid spacecraft minimum time attitude maneuvers

Abstract

The minimum time attitude slewing motion of a rigid spacecraft with its controls provided by bounded torques and forces is considered. Instead of the slewing time, an integral of a quadratic function of the controls is used as the cost function. This enables us to deal with the singular and nonsingular problems in a unified way. The minimum time is determined by sequentially shortening the slewing time. The two-point boundary-value problem is derived by applying Pontryagin's maximum prinicple to the system and solved by using a quasilinearization algorithm. A set of methods based on the Euler's principal axis rotation is developed to estimate the unknown initial costates and the minimum slewing time as well as to generate the nominal solutions for starting this algorithm. It is shown that one of the four initial costates associated with the quaternions can be arbitrarily selected without affecting the optimal controls and thus simplifying the computation. Several numerical tests are presented to show the applications of these methods.

Optimal Control Techniques for Spacecraft Attitude Maneuvers

“…At present, the optimal trajectory planning problems for spacecraft attitude maneuver mainly focus on the time-optimal and fuel-optimal control. A fuel-optimal reorientation attitude control scheme for symmetrical spacecraft with independent three-axis controls is derived in (Li & Bainum, 1994). Based on the low-thrust gas jet model and Euler's rotational equation of motion, Junkins and Turner (Junkins & Turner, 1980) investigate the optimal attitude control problem with multi-axis maneuvers.…”

Optimal Design of a High-Agility Satellite with Composite Solar Panels

“…Byers, Vadali [5] and Scrivener, Thompson [6] defined linear dynamic model of a rigid satellite and design a torque profile using the defined dynamic model. Moreover, Li and Bainum [7] applied the optimal control theory to the slewing motion of a general rigid satellite. Further, the studies on vibration characteristic of a satellite after the year 2000 had defined dynamic models of satellites with flexible bodies which are used where the Euler-Bernoulli beam model.…”

Optimal geometric motion planning for a spin-stabilized spacecraft

“…These type of problems generally define the attitude kinematics and the Euler equations as equality constraints, with the performance index a function of control torques and/or time 2 subject to prescribed boundary conditions and inequality constraints such as bounding the instantaneous torque. [8][9][10][11][12][13][14][15][16][17][18][19] In particular, designing minimum accumulated torque motions using pseudo-spectral direct transcription methods has proved instrumental in saving the International Space Station large amounts of precious propellant. 20 This method can however be computationally demanding.…”