Numerical Modelling of Concrete-to-UHPC Bond Strength

Abstract

Ultra-High Performance Concrete (UHPC) has been a material of interest for retrofitting reinforced concrete elements because of its pioneer mechanical and material properties. Numerous experimental studies for retrofitting concrete structures have shown an improvement in durability performance and structural behaviour. However, conservative and sometimes erroneous estimates for bond strength are used for numerically calculating the strength of the composite members. In addition, different roughening methods have been used to improve the bond mechanism; however, there is a lack of numerical simulation for the force transfer mechanism between the concrete substrate and UHPC as a repair material. This paper presents an experimental and numerical programme designed to characterize the interfacial properties of concrete substrate and its effect on the bond strength between the two materials. The experimental programme evaluates the bond strength between the concrete substrates and UHPC with two different surface preparations while using bi-surface test and additional material tests, including cylinder and cube tests for compression property, direct tension test, and flexural test to complement UHPC tensile properties. Non-linear finite element analysis was conducted, which uses a numerical zero thickness volume model to define the interface bond instead of a traditional fixed contact model. The numerical results from the zero thickness volume model show good agreement with the experimental results with a reduction in error by 181% and 24% for smooth and rough interface surfaces if compared to the results from the model with a fixed contact.

The Influence of the Physical-Mechanical Parameters of Rock on the Extent of the Initial Failure Zone under the Action of an Undercut Anchor

“…Numerical modelling [ 1 , 2 , 3 ], together with experiments [ 4 , 5 , 6 , 7 ], enables a detailed understanding of the actual behavior of structures and their optimization. Typically, this type of anchor is used mainly in the fastening of steel structural elements in concrete engineering structures (e.g., [ 8 , 9 , 10 ]).…”

Numerical Modeling and Analysis of Concrete Slabs in Interaction with Subsoil

“…There are several approaches to modeling fiber-reinforced concrete and determining constitutive relationships. The basic methods include modeling of concrete and fiber separately [77], the approach presented in this study of using effective values of tensile strength and fracture energy, the definition of tensile softening [2,27], and the approximation of the tensile softening function [1]. When determining the parameters, it is appropriate to proceed from a detailed laboratory program.…”

“…Numerical modeling [1,2], together with experiments [3][4][5][6][7], enables a detailed understanding of the real behavior of structures and structural optimization. The search for new and innovative design solutions is then associated with the use of advanced materials [8][9][10][11].…”

Evaluation of Smeared Constitutive Laws for Tensile Concrete to Predict the Cracking of RC Beams under Torsion with Smeared Truss Model

“…When compared with more complex models also proposed for the RC beam under torsion, which sometimes involve large computational effort (for instance [ 7 , 8 , 9 , 10 ]), the VATM is recognized as a simpler and more reliable model for predicting the torsional strength of RC beams under torsion, which is one of the most important key parameters for design. It should also be mentioned that smeared approaches, such as the VATM, constitute an alternative approach to local ones in which the local fracture properties are directly accounted for, such as in the numerical models from [ 11 , 12 ]. In smeared approaches, smeared constitutive laws for the materials are incorporated into the model.…”