On the modelling of gyroplane flight dynamics

Abstract

The study of the gyroplane, with a few exceptions, is largely neglected in the literature which is indicative of a niche configuration limited to the sport and recreational market where resources are limited. However the contemporary needs of an informed population of owners and constructors, as well as the possibility of a wider application of such low-cost rotorcraft in other roles, suggests that an examination of the mathematical modelling requirements for the study of gyroplane flight mechanics is timely. Rotorcraft mathematical modelling has become stratified in three levels, each one defining the inclusion of various layers of complexity added to embrace specific modelling features as well as an attempt to improve fidelity. This paper examines the modelling of gyroplane flight mechanics in the context of this complexity, and shows that relatively simple formulations are adequate for capturing most aspects of gyroplane trim, stability and control characteristics. In particular the conventional 6 degree-of-freedom model structure is suitable for the synthesis of models from flight test data as well as being the framework for reducing the order of the higher levels of modelling. However, a high level of modelling can be required to mimic some aspects of behaviour observed in data gathered from flight experiments and even then can fail to capture other details. These limitations are addressed in the paper. It is concluded that the mathematical modelling of gyroplanes for the simulation and analysis of trim, stability and control presents no special difficulty and the conventional techniques, methods and formulations familiar to the rotarywing community are directly applicable.

Analysis of the performance of a new type of rotorcraft

“…Duża część badań ma charakter symulacji komputerowych mających na celu przyspieszenie i zmniejszenie kosztów rozwoju komponentów [3][4] [14] [24]. Zaawansowane oprogramowanie do analizy konstrukcji MES czy przepływów CFD jest szeroko stosowane jako niezbędny element szybkiego prototypowania komponentów oraz całych statków powietrznych.…”

A New VTOL Propelled Wing for Flying Cars: Critical Bibliographic Analysis

“…Autogyros [31,32] have a horizontal axis propeller and a freespinning rotor actuated by the relative motion in air that sustains the autogiro [33]. Autogyros had a large success both in civil and military aviation.…”

Measurements of Aerodynamic Interference of a Hybrid Aircraft with Multirotor Propulsion

“…Research into rotors operating in autorotation is conducted worldwide. However, there is an insufficient number of studies on the interference of additional propulsion units upon the operation of the main rotor [ 40 ]. In the available literature one may find a range of works in the field of experimental and numerical aerodynamics, although they are mostly targeted at the gyroplane without a rotor.…”