Online Short-Circuit Protection Strategy of an Electric Powerpack for Electric Oil Pump Applications

Abstract

With the trend towards the miniaturisation and electrification of automotive components, the electric oil pump (EOP) is generally designed as an integrated powerpack in which a motor and an electronic control unit (ECU) are combined into an integrated system, with the electronic components of the ECU exposed to harsher temperature environments. The critical weakness of the traditional design is short-circuit failures, and the most common protection method is monitoring. However, this method cannot predict the accurate protection current, indicating that the fault detection level and short-circuit current (SCC) may change depending on the operating temperature and load condition to which the devices are subject. In this case, switching devices can be destroyed or deteriorated if they are unexpectedly placed outside of the protection range. This study proposes an online short-circuit protection method in which the optimal fault threshold can be controlled in real time, in accordance with changes in temperature and load conditions. To this end, this study investigates the cause of fluctuations in SCC and analyses the protection range and qualification time for SCC through worst-case analysis. To determine the optimal fault threshold, the SCC waveform is estimated through circuit analysis and a method of estimating ( ), which is the cause of SCC fluctuation, is proposed based on simulation and experimental data. Finally, according to ( ), optimal thresholds are derived and the proposed methods are experimentally-verified. It is found that the SCC could be predicted and managed within the protection range by the proposed new protection method.INDEX TERMS Automotive electric powerpack, diagnosis, electric oil pump, gate drive circuit, junction temperature, optimal fault threshold, short-circuit protection, short-circuit current waveform.

Two Cooling Approaches of an Electrohydraulic Energy Converter For Non-Road Mobile Machinery

“…In this research, the non-road mobile machine used as an example is a log loader, and its required power cycles are measured to analyse energy saving potential. The benefits of hybridisation, in general, are system efficiency increase, lower fuel consumption, lower pollution, and energysaving by regeneration [2][3][4]. Earlier studies have proven that in some log-loader cycles energy savings can be as high as 50% [5].…”

Optimization and Modeling of a Spatial CAM Mechanism for a Two-Dimensional Plunger Electro-Hydraulic Pump

“…The research focuses on optimizing the structure of the electro-hydraulic pump, including optimizing the motor [7] and innovating the pump design [8], [9]. Additionally, efforts are being made to enhance the operating environment of the electro-hydraulic pump [10] and improve its stability during usage [11]. The two-dimensional plunger electro-hydraulic pump comprises a motor, a coupler, and a two-dimensional piston pump.…”