Optimal power flow based TU/CHP/PV/WPP coordination in view of wind speed, solar irradiance and load correlations

A new method to adequate assessment of wind farms’ power output

“…(15) and (11) are identical with each other. Situation 2: the considered wind speed values differ with those used for the classification of wind speed.…”

“…Thus, by taking the wind speed values and power curve into account, WT's power output values can be achieved precisely. This approach is broadly used in many research fields of power systems including wind energy resources such as WT and WF modeling [8][9][10], reliability evaluation in the presence of wind energy [11][12][13], optimal power flow considering the stochastic nature of the WFs [14,15], power system expansion planning integrated with wind power resources [16,17], determining the optimal capacity of wind energy in power systems [18], defining spinning reserve in power system with the penetration of WFs [19] and hybrid power systems including wind energy [20,21].…”

Optimal Power Flow Techniques under Characterization of Conventional and Renewable Energy Sources: A Comprehensive Analysis

“…In 2016, Bouhouras et al [111] presented the optimization concerning the placement and sizing of DG units in distribution networks (DNs) for loss minimization. In 2015, Azizipanah-Abarghooee et al [112] presented a probabilistic OPF problem for the system consisting of the thermal units (TUs), wind power plants (WPPs), photovoltaic cell (PV), and combined heat and power (CHP). In 2016, Wei et al [58] proposed an integration technique of DG based on stochastic optimal power flow (S-OPF).…”

Scenario-based stochastic optimal operation of wind/PV/FC/CHP/boiler/tidal/energy storage system considering DR programs and uncertainties

“…5, the electrical power generations of CHP units are not independent of their thermal power and these two powers cannot be controlled in a separate manner [25]. [26].…”