Optimising the FDM additive manufacturing process to achieve maximum tensile strength: a state-of-the-art review

Abstract

Purpose Additive manufacturing or “3D printing” is a rapidly expanding sector and is moving from a prototyping service to a manufacturing service in its own right. With a significant increase in sales, fused deposition modelling (FDM) printers are now the most prevalent 3D printer on the market. The increase in commercial manufacturing necessitates an improved understanding of how to optimise the FDM printing process for various product mechanical properties. This paper aims to identify optimum print parameters for the FDM process to achieve maximum tensile strength through a review of recent studies in this field. Design/methodology/approach The effect of the governing printing parameters on the tensile strength of printed samples will be considered, including material selection, print orientation, raster angle, air gap and layer height. Findings The key findings include material recommendations, such as the use of emerging print materials like polyether-ether-ketone (PEEK), to produce samples with tensile strength over 200 per cent that of conventional materials such as acrylonitrile butadiene styrene (ABS). Amongst other parameters, it is shown that printing in the “upright” orientation should be avoided (samples can be up to 50 per cent weaker in this orientation) and air gap and raster width should be concurrently optimised to ensure good “inter-raster” bonding. The optimal choice of raster angle depends on print material; in ABS for example, selecting a 0° raster angle over a 90° angle can increase tensile strength by up to 100 per cent. Originality/value The paper conclusions provide researchers and practitioners with an up-to-date, single point reference, highlighting a series of robust recommendations to optimise the tensile strength of FDM-printed samples. Improving the mechanical performance of FDM-printed samples will support the continued growth of this technology as a viable production technique.

Patient-specific 3D-printed Splint for Mallet Finger Injury

“…That CAD file is then exported as a stereolithography (STL) file. This STL file is then “sliced” by the 3D printer’s software and read by the printer to print the component in a series of layers[ 27 ]. FDM prints thin layers of plastic layer by layer to create the part.…”

Effect of processing parameters on flexural properties of 3D‐printed polyetherketoneketone using fused deposition modeling

“…[ 1–3 ] Printing parameters such as nozzle temperature, layer thickness, building orientation, printing speed, infill density, and chamber temperature are critical factors that affect the mechanical, physical, and chemical properties of printed materials. [ 4–7 ]…”

Discrete-Event Simulation Thermal Model for Extrusion-Based Additive Manufacturing of PLA and ABS

“…Polylactic acid (PLA) [23][24][25][26], despite being a semi-crystalline polymer, is widely used in extrusion-based additive manufacturing, as the PLA crystallizes slowly and consequently shrinks and warps less than other typical semi-crystalline 3D-printed polymers. Recently, however, several semi-crystalline polymers such as polyamides (PA) [27,28], polyether ether ketone (PEEK) [29][30][31], and polypropylene (PP) [21,32,33] have been used for the extrusion-based 3D printing process. Suitable numerical models enable designers to account for the different properties of the polymers during the 3D printing process and optimize the design of 3D-printed parts [12,[34][35][36].…”