Optimization of the Conditions of Convective Drying of Thermosensitive Materials

Alyzhanov, M. K.; Sikhimbayev, M.R.; Kuzembayev, S. B.; Sherov, Karibek; Sikhimbayeva, Dinar; Ханов, Т.А.; Kurmangaliyev, T. B.; Elemes, D. E.; Donenbayev, Bakytzhan; Musaev, M. M.; Buzauova, Toty

doi:10.1515/jtam-2016-0021

Cited by 2 publications

(2 citation statements)

References 2 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The device works as follows: first, the water intake is laid out near the shore where flooding is expected, for example, near the bridge part of the road, then the shell is fixed 1 with anchors 3 into the base (soil) 2 through loops 4, then the flat part of the water intake is sprinkled with earth (Alyzhanov et al, 2016;& Sherov et al, 2020). After filling the inner cavity 6 of the shell 1 with compressed air through the valve 5, in order to give greater stability and rigidity to the structure, it is fixed with reinforcing anchors 7 through special loops 8, located 1.5 meters apart, reinforcing anchors 7 into the ground.…”

Section: Resultsmentioning

confidence: 99%

The Method of Multi-Criteria Analysis for Determining the Flood-Hazardous Area and the Development of Protective Structures

Apshikur,

Kurmangaliyev,

Goltsev

et al. 2023

Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci.

View full text Add to dashboard Cite

Abstract. The city of Ust-Kamenogorsk, East Kazakhstan region, annually has a high risk of flooding and flooding of territories caused by spring snowmelt. These extreme phenomena are one of the most dangerous natural disasters, as they cause enormous socio-economic damage to the coastal settlements of the city. In the flood zone, agricultural and residential facilities, as well as engineering and technical infrastructure facilities are indicated. In some years, the funds allocated by the local buzhet to restore the damage caused by the disaster are not enough. One of the most effective means of stopping the consequences of such natural phenomena is an early warning system. Forecasting and modeling of hydrological phenomena can be provided using new IT technologies, some of which are Geoinformation technologies (GIS technologies) based on the cartographic method.In addition to modern advanced data processing methods in the GIS environment, the article presents a water collection design for emergency protection by calculating the main influencing factors of flooding and determining specific scales of flood levels in river valleys near settlements, determining the area of reservoirs collected at a risk control point at specific flood sites, as well as analyzing the detected ers material. The prospects for the use of GIS technologies as a means of forecasting and modeling floods caused by annual floods during the spring snowmelt period are also outlined, an analysis of the real situation is carried out, and a simple design of the shore for use in extreme conditions during periods of flooding is given.

show abstract

Section: Resultsmentioning

confidence: 99%

The Method of Multi-Criteria Analysis for Determining the Flood-Hazardous Area and the Development of Protective Structures

Apshikur,

Kurmangaliyev,

Goltsev

et al. 2023

Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci.

View full text Add to dashboard Cite

show abstract

“…It should be noted, that the basis for research and development of this method was the results obtained by the authors on the study of resource-saving methods of thermo friction processing at low speeds [7][8][9].…”

Section: Introductionmentioning

confidence: 99%

Experimental Research of Rotational-and-Frictional Boring of Big Holes in Large Parts

Sherov¹,

Sikhimbayev²,

Donenbayev³

et al. 2017

Journal of Theoretical and Applied Mechanics

Self Cite

View full text Add to dashboard Cite

When producing large-dimensional parts of heavy machines, the largest specific weight in the general labour input is made by the operations, connected with machining the main holes, i. e. holes of large diameter. To the holes of large diameter of large-dimensional parts, there are specified high requirements in the aspect of accuracy of the size, shape and arrangement. Machining of holes still remains one of the topical problems of present day mechanical engineering, in particular machine-building enterprises of the Republic of Kazakhstan.Solving the problem of ensuring accuracy and quality of machining large holes of large-dimensional parts requires the development of new resource-saving technologies of machining. In this work there are presented the results of studying a resource-saving method of rotation-friction boring of large diameter holes. There has been achieved good results in providing the quality indicators, when machining by the proposed method of rotation-friction boring with the use of the tool (a disk cutter) made of steel 90CrSi5 in comparison with well-known boring of holes. The diagram of chip formation of cutting and the results of studying the zone of chip formation by the metallographic method is also presented.

show abstract

Optimization of the Conditions of Convective Drying of Thermosensitive Materials

Cited by 2 publications

References 2 publications

The Method of Multi-Criteria Analysis for Determining the Flood-Hazardous Area and the Development of Protective Structures

The Method of Multi-Criteria Analysis for Determining the Flood-Hazardous Area and the Development of Protective Structures

Experimental Research of Rotational-and-Frictional Boring of Big Holes in Large Parts

Contact Info

Product

Resources

About