Cadmium poses a severe health risk, impacting various
bodily systems.
Monitoring human exposure is vital. Urine and blood cadmium serve
as critical biomarkers. However, current urine and blood cadmium detection
methods are expensive and complex. Being cost-effective, user-friendly,
and efficient, visual biosensing offers a promising complement to
existing techniques. Therefore, we constructed a cadmium whole-cell
biosensor using CadR10 and deoxyviolacein pigment in this study. We
assessed the sensor for time–dose response, specific response
to cadmium, sensitivity response to cadmium, and stability response
to cadmium. The results showed that (1) the sensor had a preferred
signal-to-noise ratio when the incubation time was 4 h; (2) the sensor
showed excellent specificity for cadmium compared to the group 12
metals and lead; (3) the sensor was responsive to cadmium down to
1.53 nM under experimental conditions and had good linearity over
a wide range from 1.53 nM to 100 μM with good linearity (R
2 = 0.979); and (4) the sensor had good stability.
Based on the excellent results of the performance tests, we developed
a cost-effective, high-throughput method for detecting urinary and
blood cadmium. Specifically, this was realized by adding the blood
or urine samples into the culture system in a particular proportion.
Then, the whole-cell biosensor was subjected to culture, n-butanol extraction, and microplate reading. The results showed that
(1) at 20% urine addition ratio, the sensor had an excellent curvilinear
relationship (R
2 = 0.986) in the range
of 3.05 nM to 100 μM, and the detection limit could reach 3.05
nM. (2) At a 10% blood addition ratio, the sensor had an excellent
nonlinear relationship (R
2 = 0.978) in
the range of 0.097–50 μM, and the detection limit reached
0.195 μM. Overall, we developed a sensitive and wide-range method
based on a whole-cell biosensor for the detection of cadmium in blood
and urine, which has the advantages of being cost-effective, ease
of operation, fast response, and low dependence on instrumentation
and has the potential to be applied in the monitoring of cadmium exposure
in humans as a complementary to the mainstream detection techniques.