Plasma-chemical modification of concrete processed by colorific metal salts

Abstract

-The most important task at the present stage of the formation of modern society is the intensive development of the national economy on the basis of the latest achievements of science and technology. The building materials industry in the Russian Federation is one of the most energy-intensive industries. In this regard, reducing energy costs and environmental pressure on nature through the introduction of alternative energy sources in production is relevant for the state. Previously, it was proved that plasma-chemical modification contributes to the increase of water resistance, acid resistance, alkali resistance, microhardness of the fused (glazed) face layer, and also allows one to expand the possibilities of obtaining various types of decor. However, plasma-chemical modification leads to significant thermal shock, dehydration of hydrosilicates in cement stone and its softening, which reduces the operational parameters of the protective and decorative coating on concrete products, in particular, adhesion strength and frost resistance. Using a plasma jet will significantly intensify the formation of vitreous protective and decorative coating with increased technical and operational performance, and the use of various industrial waste and color salts will provide an opportunity to significantly expand the base for obtaining a variety of types of decor on the face of the concrete. In connection with the foregoing, the development of an effective technology for the production of protective decorative coatings on concrete products is a relevant area of research. The purpose of the work is the development of protective and decorative coatings on products made of concrete using recycled materials and coloring metal salts. The macro and microstructure of the protective and decorative coating and the surface layer treated with a plasma jet, the microhardness of the fused layer of fine-grained concrete after plasma-chemical modification are given in the article. The regularities of the formation of the structure of protective and decorative coatings on concrete with the use of coloring salts are substantiated.

A Block of Thermal Insulation Materials With Protective and Decorative Coatings

“…Одной из наиболее эффективных высокопроизводительных, энергосберегающих и экологически чистых технологий является плазмохимическое воздействие электродуговой плазмы на поверхность композиционных многослойных изделий [13][14][15].…”

Plasmochemical Modification of Wall Building Materials

“…Высокотемпературное воздействие плазменного факе-ла даже при кратковременном воздействии на бетон вызывает в нем дегидратацию гидросиликатов, разупрочнение бетона и образование микротрещин. Это приводит к снижению прочностных характеристик декоративного слоя [11][12][13].…”

Plasma-chemical modification of concrete

“…To expand the color characteristics and minimize dehydration, various fillers made of ceramics, glass, expanded clay, chamotte, waste from the mining or metallurgical industry, etc. are used before the plasma-chemical modification in the molding of concrete "face down" or "face up" [1][2][3][4][5][6][7][8][9]. Protectivedecorative coatings on concrete have relatively low quality indicators [10,11].…”