Platform for advanced DVB-T2 system performance measurement

This paper presents the field trials carried out in Bilbao (Spain) for testing and analyzing the performance of the DVB-T2 indoor (fixed and pedestrian) reception. Test services with different DVB-T2 and T2-Lite configuration modes have been broadcasted and indoor measurements have been carried out. As a result, signal to noise ratio threshold values for DVB-T2 indoor reception have been obtained. These values update those provided by previous studies and are also valid for planning tools to be used by broadcasters in the development of DVB-T2 networks.

Section: Processing Methodologymentioning

confidence: 99%

Field Trials-Based Planning Parameters for DVB-T2 Indoor Reception

Regueiro

Gil

Vélez

et al. 2015

“…The receiver is built on a Vector Signal Analyzer and a DVB-T2 SDR software platform. The synchronization, carrier recovery, channel estimation and equalization algorithms were optimized for DVB-T2 and thus there might be room for further improvement [27].…”

Section: A Test Methodologymentioning

confidence: 99%

Cloud Transmission: System Performance and Application Scenarios

Montalbán

Zhang

Gil

et al. 2014

Cloud Transmission (Cloud Txn) System is a flexible multi-layer system that uses spectrum overlay technology to simultaneously deliver multiple program streams with different characteristics and robustness for different services (mobile TV, HDTV and UHDTV) in one RF channel. The transmitted signal is formed by superimposing a number of independent signals at desired power levels, to form a multilayered signal. The signals of different layers can have different coding, bit rate, and robustness. For the top layer, system parameters are chosen to provide very robust transmission that can be used for high speed mobile broadcasting service to portable devices. The bit rate is traded for more powerful error correction coding and robustness so that the Signal to Noise Ratio (SNR) threshold at the receiver is a negative value in the range of -2 to -3 dB. The top layer is designed to withstand combined noise, co-channel interference and multipath distortion power levels higher than the desired signal power. The lowerlayer signal can be DVB-T2 signal or other newly designed system to deliver HDTV/UHDTV to fixed receivers. The system concept is open to technological advances that might come in the future: all new technologies, BICM/Non Uuniform-QAM, rotated constellations, Time Frequency Slicing or MIMO techniques can be implemented in the Cloud Txn lower (high data) rate layer. The main focus of this paper is to thoroughly describe the performance of this newly presented Cloud Transmission broadcasting system.

“…This SDR receiver is an evolution of a SW receiver developed for DVB-T2. The implemented channel estimation and carrier recovery methods can be found in [17].…”

Section: B Laboratory Testsmentioning

confidence: 99%

Performance Study of Layered Division Multiplexing Based on SDR Platform

Montalbán

Angulo

Regueiro

et al. 2015

Two of the main drawbacks of the current broadcasting services are, on the one hand, the lack of flexibility to adapt to the new generation systems requirements, and on the other hand, the incapability of taking a piece of the current mobile services market. In this paper, Layered Division Multiplexing (LDM), which grew out of the concept of Cloud Txn, is presented as a very promising technique for answering those challenges and enhancing the capacity of broadcasting systems. The major contribution of this work is to present the first comprehensive study of the LDM performance behavior. In particular, in this paper, the theoretical considerations of the LDM implementation are completed with the first computer based simulations and laboratory tests, covering a wide range of stationary channels and the mobile TU-6 channel. The results will support LDM as a strong candidate for multiplexing different services in the next generation broadcasting systems, increasing both flexibility and performance.