Polymerization-induced phase separation in polyethersulfone modified epoxy resin systems: effect of curing reaction mechanism

Abstract

Polyethersulfone (PES)-modified epoxy systems with stepwise reaction were studied throughout the entire curing process by using optical microscopes, time-resolved light scattering (TRLS), and a rheolometry instrument compared with that of chainwise polymerization. The results suggested that the phase separation process is mainly controlled by the diffusion of epoxy oligomers for stepwise mechanism system and by that of epoxy monomers for chainwise mechanism system. In case of high PES content (SPES-20%) light-scattering results showed a viscoelastic phase separation and the characteristic relaxation time of phase separation can be described well by the WLF equation. However, in the case of low PES content (SPES-14%) secondary phase separation phenomenon was observed by Optical Microscope and further demonstrated by rheological study.reaction mechanism, phase separation, viscoelastic effects

Constructing a filler network for thermal conductivity enhancement in epoxy composites via reaction-induced phase separation

“…While the selective distribution of fillers at the interface can result in a continuous network of fillers at a low filler loading [32], this is not easy to achieve experimentally. One method however that offers some potential is that of reaction-induced phase separation (RIPS) of thermosetting/thermoplastic resin composite systems [56][57][58][59]. These blends can form sea-island structures, co-continuous phase structures or phase inversion structures depending on the content of thermoplastic thus offering a potential strategy for better control of the network formation in a composite.…”

Selective localization of multi‐walled carbon nanotubes in epoxy/polyetherimide system and properties of the conductive composites

“…When the curing reaction of epoxy reaches a certain conversion, phase separation occurs. This kind of phase separation is defined as RIPS . As shown in Figure , the morphology evolution of composite M000 was monitored using optical microscopy.…”

“…PEI can increase the toughness of epoxy resin without any sacrifice of its T g or significant loss of other properties. Usually PEI can be soluble in the epoxy precursor and separate from epoxy oligomer as its curing reaction proceeds, which is called reaction‐induced phase separation (RIPS) . The morphology can be sea‐island, co‐continuous, or phase inversion structures depending mainly on PEI content and the curing temperature.…”

Toughening epoxy resin with blocked isocyanate containing soft chain

“…Several methods have been proposed for increasing the toughness of epoxy resins and one of the most effective approaches is the introduction of a second component which is capable of phase separation as reactive liquid rubber, thermoplastic, or core‐shell particles . Considerable attention has been paid to the use of functionalized curing agents for epoxy resins.…”