Poorly conductive electrochemically reduced graphene oxide films modified with alkyne chains to avoid the corrosion-promoting effect of graphene-based materials on carbon steel

Fe/Ni-Doped Co5.47N Nanoparticles Integrated on Nitrogen-Doped Vertical Reduced Graphene Oxide Arrays for Overall Water Splitting in Wide pH Range

“…30,31 In addition, the peaks at 2000 cm −1 ∼2500 cm −1 correspond to the signal of C≡N and C≡C, illustrating the successful synthesis of N-VrGO. 32,33 The enlarged SEM image (Fig. 1b) of Fe, Ni-Co 5.47 N@N-VrGO-2 shows that Fe, Ni-Co 5.47 N nanoparticles which formed after hightemperature calcination are abundantly and uniformly loaded on the surface of graphene sheets, and the particles are dispersed and no agglomeration occurs, so that allowing more active sites to be exposed.…”

Recent research advances on corrosion mechanism and protection, and novel coating materials of magnesium alloys: a review

“…Therefore, inhibiting galvanic corrosion and prolonging the service life of coatings are still technical challenges. 251…”

Synthesis of MOFs/GO composite for corrosion resistance application on carbon steel

“…49 At the same time, the interface compatibility between GR or GO and waterborne acrylic varnish is poor, which can also cause defects such as micropores and microcracks in the coating. 50 These defects may promote the corrosion reaction of the carbon steel substrate. So, those shielding layers could prevent the corrosive medium from eroding the carbon steel surface in a short time immersion.…”