Potentials of sustainable electricity production from sawdust by small-scale wood transformation units: a case study in Cameroon

Abstract

Wood processing produces large volumes of residues which, when not properly managed, pose an environmental problem in the vicinity and beyond. These residues mainly constituted of sawdust and wood shavings, possess important energy potentials that are largely underexploited in Cameroon. In this work, we investigate the possibility that sawdust generated by wood transformation units (WTU) in Cameroon can be used sustainably to render them self-sufficient in terms of electricity demands through the production of syngas in a gasification process. Both qualitative and quantitative methods are used in the research. Initially, a questionnaire was employed to quantify the sawdust produced in the town of Yaounde, Cameroon. A major WTU "LFM_Sciérie" was selected to evaluate the feasibility of electricity generation from syngas produced by gasification of its wood waste. Proximate analysis of sawdust sampled from the LFM sawmill included moisture content 17.74 ± 0.27%, ash content 3.91 ± 1.54%, volatile matter 74.62 ± 1.47%, and fixed carbon 3.73%. The gross calorific value of the sawdust sample was estimated to be 20.08 MJ/kg. The total quantity of sawdust produced in the Yaounde municipalities is 290 tons/week which translates to an energy potential of 713 GJ/week. Theoretical calculations and modelling using a thermodynamics software, Cycle-Tempo, indicate that the amount of sawdust generated at the LFM sawmill of about 7 tons/ week, can conveniently satisfy its electricity demands of approximately 3.3 MW/week. Small-scale WTUs in Yaounde can be rendered energy-autonomous by the generation of electricity from syngas produced via a gasification process of its waste.

[Retracted] Analysis of the Path and Relationship between Movement‐Style Environmental Governance and Political Potential Energy Integration and Isomorphic Transformation

“…Environmental protection and construction has become the fundamental task of western development. Comprehensive measures should be taken to "return farmland to forests, close mountains for greening, use grain for relief, and individual contracting [2]. "…”

Reuse of Sawdust in Developing Countries in the Light of Sustainable Development Goals

“…Up to 13 of the wood species have calorific values of 20 to 26 MJ/kg, which are equivalent to coal and might be used as energy supplies. Veeyee et al [31] studied the feasibility of using sawdust generated by wood transformation units (WTU) in Cameroon to create syngas in a gasification process to make them self-sufficient in terms of power consumption using both qualitative and quantitative methodologies. The sawdust sample's gross calorific value was 20.08 MJ/kg, with 290 tonnes of sawdust generated in Yaounde municipalities per week; sawdust theoretically holds a latent power potential of 713 GJ per week.…”

Comparative models for multi-step ahead wind speed forecasting applied for expected wind turbine power output prediction

“…The main sources of commercial energy in Cameroon are from hydropower (73%) and thermal power (10%; Veeyee et al, 2021). According to Wirba et al (2015), the development of new renewable energy sources such as wind energy is required for Cameroon electrification, necessary to jeopardize its economic development.…”