Predictive Direct Power Control for Dual-Active-Bridge Multilevel Inverter Based on Conservative Power Theory

Abstract

This paper explores the feasibility of multilevel dual-active bridge-inverter (DABMI) applications for grid-connected applications of a modern Model of Predictive Direct Power Control (MPDPC) based on the conservative power theory (CPT). In the case of unbalanced grid voltages, the objective of the study is to promote continued active and reactive energy in MPDPC without reducing efficiency such as transient response and current harmonics. The nature of the instantaneous p-q theory permits only one out of three control targets to be fulfilled. The proposed control approached directly regulates the instantaneous active and reactive power to achieve three particular control objectives namely sinusoidal and symmetrical grid current, cancelling twice of fundamental grid frequency reactive power ripples, and removing twice grid frequency active power ripple. The techniques of complicated Grid part sequence extraction are unnecessary and improved at no extra expense, as is the case with current MPDPC fault-tolerant approaches. The instantaneous power at the next sampling instant is predicted with the newly developed discrete-time model. Each possible switching state will then be evaluated in the cost function defined until the optimal state which lead to the minimum power errors is determined. In MATLAB/Simulink simulation, the proposed CPT-based MPDPC measures reliability and performance at balanced and unbalanced grid voltages then compared with the conventional and existing MPDPC The proposed method manages to achieve all of three control targets which generates sinusoidal grid currents and attenuates active and reactive power ripple of twice the grid frequency exactly at the same time without losing its critical efficiency including transient reaction and current harmonics.

Improved Predictive Control for an Asymmetric Multilevel Converter for Photovoltaic Energy

“…The modulation techniques for these converters may be of several types. Some developments apply PWM (Pulse Width Modulation), SVM (Space Vector Modulation), M 2 PC (Modulated Model Predictive Control), SHE (Selective Harmonic Elimination), and Staircase Modulation [4,6,9,[12][13][14][15][16][17][18][19][20]. Similarly, there is a wide variety of control strategies that can be applied to multilevel converters.…”

A Novel Multilevel DC-Link Three-Phase T-Type Inverter

“…Various modulation techniques [7][8][9][10] and power electronic component technologies [11][12][13][14] are needed to achieve the desired output stepped waveforms. Various types of switches have been constructed and validated in [15,16] for different types of inverters for the purpose of increasing the reliability of the inverters such as to reduce the total count of passive components and to obtain the desired stepped output waveforms [17][18][19].…”