Preparation of Nanocrystalline TiN Coated Cubic Boron Nitride Powders by a Sol–Gel Process

Abstract

Cubic boron nitride (cBN) particles coated with 20 wt% nanocrystalline TiN were prepared by coating the surface of cBN particles with TiO2, followed by nitridation with NH3 gas at 900 degrees C. Coating of TiO2 on cBN powders was accomplished by a sol-gel process from a solution of titanium (IV) isopropoxide and anhydrous ethanol. An amorphous TiO(x) layer of 50 nm thickness was homogenously formed on the surface of the cBN particles by the sol-gel process. The amorphous layer was then crystallized to an anatase TiO2 phase through calcination in air at 400 degrees C. The crystallized TiO2 layer was 50 nm in thickness, and the size of TiO2 particles comprising the layer was nearly 10 nm. The TiO2 on cBN surfaces was completely converted into nanocrystalline TiN of uniform particles 20 nm in size on cBN particles by nitridation under flowing NH3 gas.

Cubic boron nitride-containing ceramic matrix composites for cutting tools

“…Researchers have started coating TiN, TiN-TiB 2 , nickel and SiO 2 onto a cBN powder surface. 43,46,50,58,59 Intensive further work is needed to reveal the benefi cial effects of the coatings on the sintering behavior and mechanical properties of CBCCs.…”