Pressure management by combining pressure reducing valves and pumps as turbines for water loss reduction and energy recovery

Abstract

Conventional pressure reducing valves (PRVs) are often used in water distribution systems for pressure control and water loss reduction. Nevertheless, depending on the conditions in the network, advanced pressure management approaches might be more suitable. In this study, the potential water loss reduction for an intelligent system that combines PRVs and pumps as turbines (PATs) in a pilot study in Germany was estimated. The aim of the proposed system is to recover the pressure energy in the supply network by transforming it into electricity and, at the same time, contribute to the reduction of water losses and material stress. In order to evaluate the pressure situation and predict the water savings of the different pressure management strategies in the studied supply area, hydraulic modelling was used. Using the calibrated model, the optimal outlet pressure for the installed PRV and for the intelligent pressure control system was calculated, taking into account the pressure at the critical point as a boundary condition. Furthermore, the pressure-dependant leakage flow was simulated using the emitter coefficient feature in EPANET. Here, a pressure exponent of 1.5 was used, assuming uniform background leakage along the distribution system. For the analysed network, 28.5% and 45% water savings are expected for the fixed and for the advanced pressure management strategy, respectively. The predicted water savings and the leakage assumptions are to be verified either on field or experimentally. This study concludes that hydraulic modelling is essential for assessing water supply networks, as well as for optimizing current pressure management strategies and predicting its benefits.

Leakage Management and Pipe System Efficiency. Its Influence in the Improvement of the Efficiency Indexes

“…Reference [124] estimated that the installation of PATs represents a 45% reduction in water savings equivalent to 7000 m 3 /year. An optimization method is proposed that uses an objective function for the reduction of leaks and energy production by implementing PATs in a distribution system [125].…”

Optimizing Conduit Hydropower Potential by Determining Pareto-Optimal Trade-Off Curve

“…Reduction of leaks, decreasing the pressure in water supply systems and increasing the efficiency [12][13][14][15][16][17][18][19][20] Proposal to use adapted machines (PATs and tubular propeller) in water supply systems to reduce the pressure [21][22][23][24] Description and operation of a PAT with a review of available technologies [25][26][27][28][29][30] Performance and modeling of a PAT [26,[31][32][33][34][35][36][37][38] Installation of energy recovery systems or devices in water supply networks [1,4,9,11,15,17,[39][40][41][42][43][44][45][46][47][48][49][50][51] Implementation of simulations to determine the theoretical recovered energy in water supply and irrigation systems…”

Perspectives of Water Distribution Networks with the GreenValve System

“…Table A1 is shown as a function of the flow coefficient CV. Data are from references [23,24,[38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55] or supplied by water utilities. Dotted lines are the average flow coefficient (vertical line) and the average dissipated power (horizontal line).…”