Process flowsheet analysis of pervaporation‐based hybrid processes in the production of ethyl tert‐butyl ether

Abstract

This article has been accepted for publication and undergone full peer review but has not been through the copyediting, typesetting, pagination and proofreading process, which may lead to differences between this version and the Version of Record. Please cite this article as doi: 10.1002/jctb.5186 CONCLUSION: Incorporating pervaporation modules in the process flowsheet for production of ETBE allows to unload the main separation unit (debutanizer column), thereby reducing energy consumption and operating costs and increasing throughput.

Bioethanol and biodiesel: Bibliometric mapping, policies and future needs

“…Either in its pure form or mixed with gasoline, alcoholic biofuels can be used as a transportation fuel. E10 is the lowest percentage (10%); blended form of alcoholic biofuel [26]. The production and utilization of bioethanol have gained significant attention in the last few decades, and one advantage is that it could decrease CO2 concentration, as it reduces the dependence and consumption of fossil fuels [21].…”

Study of Recombinant Protein Fractions From the Bombyx Mori and Pichia Pastoris Using "Native Page" Method

“…Texnologik jarayonlarni boshqarishda rektif-ikatsiya kolonnasi eng koꞌp oꞌrganiladigan obꞌyektlardan biri boꞌlib hisoblanadi. Oxirgi yarim asrdan ortiq vaqt mobaynida rektifikatsiya jarayonini rostlash usullariga bagꞌishlangan yuzlab ilmiy maqolalar va adabiyotlar chop etilgan [2]. Ushbu ishda, bosimni kompensatsiyalovchi temperaturani rostlashni amalga oshirishni miqdoriy ifodalashning sonli usullari koꞌrib oꞌtiladi.…”

Polymeric Nanocomposite Membranes for Next Generation Pervaporation Process: Strategies, Challenges and Future Prospects

“…During this process, the unreacted ethanol and ETBE forms azeotropic mixtures, which are difficult to separate by conventional distillation. A process simulation software Aspen Plus was used to carry out the simulation tasks and the process flowsheet analysis has been compared [ 375 ].…”