Production Logging and Flow Diagnosis in Heterogenous Reservoirs

Abstract

Production logging measures downhole flow properties under dynamic conditions with an objective to gain insight into the downhole flow dynamics and quantify zonal flow contributions. Production logs are acquired during "stabilized flowing and shut-in conditions" and the observed flow behavior is assumed to be representative of the reservoir flow behavior. In a homogenous reservoir this assumption may not be far from reality. Heterogeneous reservoirs, however, pose another challenge. Flow dynamics observed in heterogeneous reservoirs can be time dependent; therefore the time frame of data acquisition is critical to the conclusions that can be drawn from the interpretation.Presented herein is a case study of production logs acquired in a seemingly homogenous reservoir, the interesting dynamics observed from the data, and the methodology used to unravel the reservoir behavior. The production logs acquired during shut-in conditions revealed downhole cross flow between the reservoir layers. However a change in the direction of cross-flow between two shut-in acquisitions, acquired within 10hours of each other, revealed a much more complex reservoir than originally anticipated. Further analysis of the data and integration with other reservoir evaluation techniques revealed the heterogeneity of the reservoir with the existence of three radial compartments exhibiting different reservoir pressures, mobility and productivity index.The flow behavior observed from the production logs is unique and provides an insight to downhole flow dynamics in heterogeneous reservoirs. The methodology used in unraveling the reservoir behavior, and the integration of the production logs with other reservoir evaluation techniques, aided in improving reservoir characterization and ultimately reservoir management. IntroductionProduction logs provide measurements of downhole flow properties to promote an understanding of the downhole flow repartition of several zones, which then provides more information on the contribution the different reservoir layers make to the total production. In a homogenous reservoir, with constant properties, the reservoir response does not change with time and the flow behavior recorded at any time can be assumed to be representative of the reservoir behavior. However, in a heterogeneous reservoir, the nature of the reservoir may cause its flow behavior to change with time. A typical example will be a dual porosity reservoir system: in a dual porosity system, the reservoir is described to be composed of two systems -a block system and a matrix system. The matrix system has high permeability but low storativity, meaning that the fluid will flow faster through the matrix but it does not have enough volume to support the production (Fig 1). The block system on the other hand has high storativity but low permeability, meaning that fluid cannot flow directly from the block system into the wellbore. The fluid will flow from the block system into the matrix and then into the wellbore (Fig 2). When this type of reservoir is p...

Study on an Anti-adsorption Micromaterial Tracer System and Its Application in Fracturing Horizontal Wells of Coal Reservoirs

“…The vertical depth of horizontal wells is also different, resulting in a more complex fluid flow in the wellbore. The production profile test of horizontal wells is a highly challenging task due to the influence of various factors such as temperature and pressure. − …”