Radiation effects considerations for the application of photonics in space systems

Abstract

Ken .label @ g sfc.nasa.gov (301) 286-9936Abstruct-As civilian and military spacecraft continue to evolve, meeting performance demands will become particularly challenging because performance levels will be constrained by severe cost and weight restrictions. To meet these challenges, new technologies, such as photonics, w i l l be employed that can provide desired performance levels within the framework dictated by these constraints. For the insertion of a new technology into a spacecraft to be successful, the radiation hardness assurance (RHA) of the technology must be established so that the mission is not jeopardized by exposure to the space radiation environment. In this paper we discuss the RHA issues associated with the infusion of photonics into space systems, both military and civilian. These issues w i l l be contrasted with similar problems that have been encountered in the more traditional area of RHA for Si microcircuits.

IRCOMM: spacecraft free-space optical bus development

“…These have been shown to have generally acceptable radiation properties [4], especially when biased at 5V or less as will be done in our application. They are also inexpensive and readily available in a variety of packaging options.…”

“…While having very low mass and size as well as good transmission range, these transceivers utilized infrared LEDs (IREDs), which have been shown to suffer from radiation-induced displacement damage depending on the device's construction [4] [5]. The resulting drop in LED effi ciency could cause signifi cant degradation of range, data rate, or power effi ciency.…”

Intra‐spacecraft optical communication solutions using discrete transceiver

“…The optical components [31][32][33] are more prone to space radiation effects; therefore, their testing is necessary before use. The optical components mostly suffer from the displacement damage effect [28][29] and the device tolerance to this damage can be tested by exposing it to the radiation source with and without bias and measuring the performance. The components were evaluated with various The percentage decrease after the exposure of radiation dose of 10 times the mission life is plotted in Fig.6.…”

High-speed ADC and DAC modules with fibre optic interconnections for telecom satellites

“…Because radiationinduced attenuation (RIA) bands in fibres are centred in the ultraviolet, fibres have better radiation resistance at longer wavelengths [6]. However, the radiationhardness of laser-optimised 50-µm graded-index fibres was recently tested in the ESA' s SpaceFibre project [7].…”