Reactive ion etching mechanism of plasma enhanced chemically vapor deposited aluminum oxide film in CF4/O2 plasma

Abstract

Aluminum oxide film prepared by plasma enhanced chemical vapor deposition (PECVD) is one of the promising candidates for an etch mask or an etch barrier material in very large scale integrated fabrication. We have investigated the reactive ion etching mechanism of the PECVD aluminum oxide films in the CF4/O2 plasma. The dependences of the aluminum oxide etch rate on the atomic fluorine concentration and the incident particle bombardment energy are studied at various etching conditions. The etch products and their depth distribution are also determined by analyzing the surface layer of the etched aluminum oxide films with Auger electron spectroscopy. The CF4/O2 plasma fluorinates the aluminum oxide surface layer through the particle bombardment activated reaction, producing etch products in the form of AlF3 or AlOXFY, which is nonvolatile but has a higher sputtering yield than aluminum oxide. The reactive ion etching of aluminum oxide proceeds by the formation and the sputter removal of the etch product. The etch rate strongly depends on the particle bombardment energy because it determines not only the formation rate but also the removal rate of the etch products. However, the atomic fluorine concentration has little effect on the etch rate because the consumption rate of fluorine radicals is so low that they are always superfluous under any experimental conditions.

Study on sapphire removal for thin-film LEDs fabrication using CMP and dry etching

“…Compared with wet etching, dry etching can provide an anisotropic profile and a fast etching rate. Much of the previous work has investigated several etch techniques such as chemical wet etching after ion implantation [6], reactive ion etching [7], laser-induced etching [8,9], and inductively coupled plasma etching (ICP) [10,11]. BCl 3 -based gas chemistry is widely used to etch sapphire because B scavenges oxygen, and it forms BOCl x volatile etch products [12].…”

The etching properties of Al2O3 thin films in N2/Cl2/BCl3 and Ar/Cl2/BCl3 gas chemistry

“…However, since single-crystalline Al 2 O 3 is very stable for physical and chemical etchant, the physical and the chemical stability becomes a problem for polishing, etching, device isolations, and fabrication of a device structure such as vertical device. To obtain high sapphire etch rates with high etch selectivities, recently, the various sapphire etching techniques such as chemical wet etching after ion implantation [4], ion beam etching (IBE) [5], reactive ion etching (RIE) [6], laser-assisted etching [7] and inductively coupled plasma (ICP) [8] have been studied. For etching sapphire, BCl 3 , CCl 4 , SiCl 4 , HF, CHF 4 , etc.…”

Growth of A1N by the chemical vapor reaction process and its application to lateral overgrowth on patterned sapphire substrates

“…It is well known that etching of sapphire is difficult due to its hardness and chemical stability. Research on many etching techniques such as ion beam etching [7], reactive ion etching [8], inductively coupled plasma etching [9,10], chemical wet and ion beam etching after ion implantation [11] and so on have been carried out. However, dry etching techniques do not provide sufficient etch rates in sapphire.…”