Research on Directional Controllability of Cracking in Hydraulic Fracturing of Hard Overburden Based on Local Stress Field Intervention

Abstract

As a widely-used method of digging roadways in China, gob-side entry driving features specific advantages, such as a high recovery rate and good isolation effects. However, under the condition of hard overburden, the excessive bearing pressure of small coal pillars will easily cause serious internal damage in the coal and the run-through of the plastic zone, leading to harmful gas leakage in the goaf. Therefore, based on the engineering background of small coal pillars in the 18506 working face of Xiqu Coal Mine, this paper comprehensively adopts theoretical analysis, numerical simulation, industrial tests, and other methods, analyzes the evolution mechanism of isolated bearing and plastic fracture areas of small coal pillar under hard overburden, studies the influence law of hard overburden cutting parameters on the isolation and stability of small coal pillars, and puts forward the technology of actively cutting the top to weaken the stress concentration of coal pillars under hard overburden. With the reasonable cutting parameters determined, the controllable mechanism of hydraulic fracturing cutting under hard overburden further revealed, and the hydraulic fracturing cutting technology with “controllable cutting orientation of hydraulic fracturing with local stress field intervention” formed as the basic core, the stress situation on the roof is improved, realizing the stability control of the coal pillars for the roadway protection, and avoiding gas leakage and other disasters caused by small coal pillar destruction.

Characteristics of waterproof failure and optimal width of narrow coal pillars under the coupled effects of mining, excavation and seepage

“…To prevent water inrush disasters, it is common practice in mine development to leave a certain width of coal pillars between adjacent working faces, as shown in Fig. 2, to block the accumulation of water in the gob (Wang et al 2021;Chen et al 2022a;Galav et al 2022;He and Huang 2022;Fang et al 2023). The stability of these waterproof coal pillars has long been one of the critical research topics in coal mine development (Wang 2006;Hu et al 2019;Li et al 2021;He et al 2023).…”

Stability control of goaf‐driven roadway surrounding rock under interchange remaining coal pillar in close distance coal seams

“…16,17 However, it is very difficult to control the narrow coal pillar stability under high-stress conditions when drilling along the goaf. 18 To improve the narrow coal pillar stability, control technologies such as rational coal pillar width, 19 roof cutting pressure relief, [20][21][22][23][24] and strengthened support 25 have been proposed. There are also joint applications of multiple technologies.…”