Understanding a structure's behavior is necessary for most applications, especially excitation in ultrasonic applications. Currently, ultrasonic devices are used in various fields and have an essential role in nondestructive testing (NDT). The structure's behavior must be concerned with achieving the best practice. The structural vibrational behavior depends on natural frequency and mode shape. This study attempted to determine the effect of influence parameters on shape deformation for designing the adequate excitation condition. In this study, the influence parameters of a uniform beam, including geometry, support condition, and material, were included to investigate their effect on the frequency, mode shape, and structural response. The result showed the significant influence of a structure's length and support condition on the mode frequency, dramatically decreasing mode frequency for extended installation and cantilever support. This study investigated the three common mode shapes revealed that the longitudinal bending shape dominated due to the loading direction. Therefore, the shape deformation of the structure is mainly governed by the external excitation source, and the high structural response is received by applying the excitation near the antinode position of the vibration. Nevertheless, the computational result showed a good agreement with the analytical validation with less than 1 % error. The study leads to understanding the vibration, which can be further used for either the effective sensor attachment or designing the vibration control of ultrasonic applications.