Review of morphing concepts and materials for wind turbine blade applications

Abstract

With increasing size of wind turbines, new approaches to load control are required to reduce the stresses in blades. Experimental and numerical studies in the fields of helicopter and wind turbine blade research have shown the potential of shape morphing in reducing blade loads. However, because of the large size of modern wind turbine blades, more similarities can be found with wing morphing research than with helicopter blades. Morphing technologies are currently receiving significant interest from the wind turbine community because of their potential high aerodynamic efficiency, simple construction and low weight. However, for actuator forces to be kept low, a compliant structure is needed. This is in apparent contradiction to the requirement for the blade to be load carrying and stiff. This highlights the key challenge for morphing structures in replacing the stiff and strong design of current blades with more compliant structures. Although not comprehensive, this review gives a concise list of the most relevant concepts for morphing structures and materials that achieve compliant shape adaptation for wind turbine blades.Copyright © 2012 John Wiley & Sons, Ltd.

Fatigue Loads Mitigation on Horizontal Axis Wind Turbines Using Aerodynamic Devices. A Survey

“…The benefits brought in by morphing flaps are; there is no discontinuities, hinge line and air gap created when the rear part is deflected unlike traditional rigid flaps [45]. Furthermore, morphing flap has better aerodynamic efficiency/performance [53] Several researches about morphing trailing flap have been conducted numerically and experimentally [44,45,[63][64][65][66][67]. Researchers identify morphing flap as a potential element for load reduction in up-scaling wind turbines.…”

Asymptotic homogenization for modeling of wingbox structures

“…Recent advancements in additive manufacturing and 4D printing [1,2] facilitate the fabrication of these structures with wide-ranging architectures and geometries. Such progress renders plates and shells, including sandwich and reinforced structures, particularly attractive for many applications in lightweight construction, aerospace and automotive engineering, naval architecture and marine engineering, nanotechnology, biomedical engineering and sports equipment, e.g [3][4][5][6].…”

Analysis of the Aerodynamic and Structural Performance of a Cooling Fan with Morphing Blade

“…Many studies have focused on active flow control by considering the employment of SMAs elements for actuation purposes. Examples of morphing applications regard the improvement of the global efficiency of aircraft wings [3][4][5], noise reduction during aircraft take-off [6], the development of a rotor blade control system [7], the fabrication of actuators for tracking helicopter blades while in-flight [8], and the application of aerodynamic control devices for wind turbine blades [9,10]. The notion of smart advanced blades, which can control themselves and reduce (or eliminate) the need for an active control system, is an appealing solution in blade technology to increase efficiency at several different flow regimes.…”