The emission properties of ns 2 -type Sn 2+ emission centers were demonstrated in CaO-B 2 O 3 -SiO 2 glasses. The broad excitation bands, which are assumed to be composed of S 1 and S 2 sub-bands, correlate strongly with Sn 2+ doping content. The blue Sn 2+ emission bands can be tailored by tuning Sn 2+ coordinate field. Significant enhancement of Sn 2+ emission was observed in B 2 O 3 -rich glasses. Owing to energy-transfer (ET) from Sn 2+ to Tb 3+ /Mn 2+ , significant enhancement of Mn 2+ and Tb 3+ emissions (32 times for Tb 3+ ) were obtained. Moreover, a wide-range-adjustable full-color emitting was achieved via tuning the ET ratio of Sn 2+ →Mn 2+ to Sn 2+ →Tb 3+ and modifying glass structures. Our research extends the understanding of the interactions between Sn 2+ and Mn 2+ /Tb 3+ in amorphous materials, and these deep-light-induced glasses show potential application in lighting and display fields.Nowadays, solid-state lighting (SSL) in the form of phosphorconverted light-emitting diodes (LEDs) has become more widespread. 1-3 These SSL devices are expected to replace conventional fluorescent lamps in the near future because of vital advantages such as superior efficiency, environmental friendliness and so on. Presently, deep ultraviolet (UV) LEDs with the emission wavelengths in UV-C (190-280 nm) and UV-B (280-315 nm) are being actively developed worldwide for their wide use in germicidal and biochemical applications. 4 More recently, the combination of high-power and deep-UV excitation sources with green, blue and red tricolor emission phosphors to generate white-light has aroused scientists' great interests. [4][5][6] Meanwhile, it is urgent to develop single-component white-emitting phosphors excited by deep-UV sources. 4-7 Specifically, recent development in shorter wavelength excitation sources further enables the practical implementation of deep-UV pumped lamps. However, the organic sealant resin for these powdered phosphors can be damaged by the deep-UV and high-power lights. 5,6 Therefore, we emphasize that inorganic glass phosphors with good emission properties and excellent durability are one of the potential phosphor candidates for further practical applications.Compared with powdered phosphors used for LEDs, transparent glasses exhibit many advantages, such as lower production cost, better thermal stability, epoxy-resin-free assembly process, and wide range for microstructure design. 3,6,8 Investigation into photoluminescence properties of amorphous glass phosphors for LEDs has been carried out extensively, but it was mainly limited to rare-earth (RE) ions activated glasses. 6,8-10 However, RE ions with parity forbidden f-f transitions cannot be efficiently pumped by UV-light due to their small absorption cross sections. 11 It is notable that glasses containing ns 2 -type (n ≥ 4) emission centers, such as Sn 2+ , Bi 3+ , Sb 3+ , Tl + , Pb 2+ and Hg 0 , have attracted considerable attention recently due to strong photoluminescence (PL) properties for the parity allowed transitions. Moreover, the ...