Self-Assembly and Tribological Property of a Novel 3-Layer Organic Film on Silicon Wafer with Polydopamine Coating as the Interlayer

Abstract

A novel 3-layer organic film was fabricated on silicon wafer with a polydopamine coating (coded as PDAc) as the interlayer by a multistep self-assembly process. The formation and structure of the films were analyzed by means of ellipsometric thickness measurement, water contact angle measurement, and attenuated total reflection-Fourier transform infrared spectrometry (ATR-FTIR). Meanwhile, an atomic force microscope (AFM) characterization was performed to evaluate the adhesive and microtribological behaviors of the 3-layer film, and a ball-on-plate tribometer was used to test macrotribological performance. As results show, the as-prepared 3-layer film possessed the excellent tribological properties characterized by lower friction and higher antiwear ability, which was ascribed to the special chemical structure of the film, i.e., the strong adhesion of the film to the silicon wafer, the chemical bonding between the adjacent layers, the cross-linked structure of the PDAc interlayer, and the hydrophobicity, high flexibility, and high elasticity of the stearoyl chloride (STC) outer layer. Hopefully, the present work provides a feasible route to construct a multilayer film with excellent structural stability and tribological behavior. The titled multilayer film might find potential applications in boundary lubrication and many other areas.

Self-Assembly of Octadecyltrichlorosilane on Graphene Oxide and the Tribological Performances of the Resultant Film

“…26 The preparations of APTES-SAM and APTES-GO have already been performed in our previous studies. 5,22 As experimental results indicate, GO can be chemo-grafted onto an APTES-SAM (with a thickness of 0.7 nm, which is in accordance with the reported value in literature 21 ) surface successfully.…”

Deposition Mechanism and Properties of Thin Polydopamine Films for High Added Value Applications in Surface Science at the Nanoscale

“…The intermediate polydopamine layer was assembled on a monolayer of 3-aminopropyltriethoxysilane (APTES) to improve its adhesion to the underlying silicon substrate [86]. Indeed, strong adhesion between the lubricant layer and the substrate is mandatory to ensure stability of the coating under wear.…”

Recent Progress of Mussel‐Inspired Underwater Adhesives

“…[41] Based on the same principle, a polydopamine intermediate was used in the fabrication of 3-layer organic film on silicon wafer by a multistep self-assembly process. [42] The as-prepared 3-layer film possessed excellent tribological properties characterized as lower friction and higher antiwear ability, which was ascribed to the special chemical structure of the film, i.e., the strong adhesion of the film to the silicon wafer, the chemical bonding between the adjacent layers, the cross-linked structure of the polydopamine interlayer, and the hydrophobicity, high flexibility, and high elasticity of the stearoyl chloride (STC) outer layer. [42] As an intermediate to anchor functional molecules to the surface, catechol and its analogues, have strong adhesion and stability under water.…”