Setting Time of the Geopolymer Binder with White Soil Substitution

Abstract

This study analyzes the effect of white soil as a substitution of fly ash on geopolymer binders. Fly ash from Tanjung Jati Jepara, white soil from Kupang, water and NaOH as alkaline activators are mixed into binders and tested for setting time with a Vicat tool. The water factor of the binder was used 0.5. The white soil substitution in fly ash using a percentage of 0 to 30 of the weight of fly ash. Fly ash and white soil used had the particle size smaller than 0.074 mm or passed the number 200 sieve and had a moisture content of 0%. The results show that the setting time of geopolymer binder with substitution white soil in the range of 52.5 to 105 minutes for the initial setting time and is between 180 to 225 minutes for the final setting time. This value approaches the same as the setting time of Portland cement in SNI 15-2049-2004. From the 7 variations tested, the binder with 15% of white soil has a faster setting time compared to other variations, i.e 52.5 minutes for initial and 180 minutes for final setting time. The temperature when testing affects the setting time of the geopolymer binder