Significant heat transfer enhancement for R123 condensation by micromembrane cylinder

Abstract

Renewable energy or low grade energy utilizations need high performance of phase change heat exchangers. Suspending micromembrane cylinder in tube (called modulated heat transfer tube) increases the void fractions or vapor qualities near the tube wall to significantly enhance heat transfer. The R123 condensation heat transfer with horizontal position was investigated. The results for the bare tube and modulated heat transfer tube were tested case by case. It is found that the modulated heat transfer tube significantly enhance the condensation heat transfer, with the heat transfer enhancement factors (EF) covering the range of 1.118-2.124. The comprehensive performance evaluation criteria (PEC) had the range of 0.71-1.66, with most of runs behaving PEC larger than 1.0. For the two-phase outlet conditions, the EF values are increased with increases in the vapor mass fluxes, Gx in , where G is the mass flux and x in is the inlet vapor mass quality. The EF values are inversely related to Gx in for the subcooled liquid outlet cases. The enhanced heat transfer mechanisms are analyzed with the observed images together with the discussion of pressure and velocity distributions.

Condensation heat transfer enhancement mechanism for vertical upflows by the phase separation concept at small gravity

“…Liquid, however, can be pushed into the mesh cylinder inside. The experimental results [27][28][29][30][31] demonstrated that the condensation heat transfer performance was increased largely in the new flow pattern. Even if in the non-optimized tube, the condensation heat transfer performance was still increased almost two times.…”