Simultaneous Adsorption of 4,6-Dimethyldibenzothiophene and Quinoline over Nickel and Boron Modified Gamma-Al2O3 Adsorbent

Abstract

The simultaneous adsorption of quinoline and 4,6-dimethyldibenzothiophene over adsorbents, based on alumina modified with boron and nickel under ambient temperature and pressure, was studied. The adsorbents were characterized by BET specific surface area, a potentiometric method for the determination of acid strength, electrophoretic migration, and X-ray diffraction. The results showed that the adsorbent containing nickel had better adsorption capacity than the adsorbent modified with nickel and boron, which was attributed to its greater acidity and ability to generate π-complexation between the adsorbent and the molecules. In terms of selectivity, quinoline was more adsorbed than 4,6-dimethyldibenzothiophene in all systems, due to the basic nature of quinoline. The experimental data in all cases were adjusted by three kinetic models (Yoon–Nelson, Yan and Thomas), and the regression coefficients in all models were close to one. Finally, the values of the kinetic constant obtained by the Thomas model were used to relate the adsorption capacity results.

Residue Char Derived from Microwave-Assisted Pyrolysis of Sludge as Adsorbent for the Removal of Methylene Blue from Aqueous Solutions

“…However, the process of these methods is complex and has high costs, which limit their application in wastewater treatment. Adsorption is thought to be a promising technology, due to its simple treatment process, high efficiency, and wide applicability [8][9][10][11][12][13][14][15][16][17][18][19][20][21][22].…”