SiN membranes with submicrometer hole arrays patterned by wafer-scale nanosphere lithography

Abstract

In this work, nanosphere lithography was integrated with standard microfabrication for the wafer-scale fabrication of silicon nitride (SiN) membranes with arrays of submicrometer holes. A monolayer of polystyrene (PS) beads with a mean diameter of 428 or 535 nm was spin coated onto the front side of a (100)-silicon wafer double-side coated with 100 nm of low-stress SiN. The size of the deposited PS beads was reduced by oxygen plasma reactive ion etching. This allowed to tune the hole size in the released SiN membrane while maintaining the hole array periodicity. Using the size-reduced PS beads as a lift-off template in a standard nanosphere lithography lift-off procedure, a 20 nm thick chromium hole etch mask was realized. This hole mask was patterned by UV photolithography, thus allowing for the local dry-etching of holes into the SiN layer. The holey areas were released from the backside in a combined Si dry- and wet-etch process. During the final wet etch, the wafer front side was protected with a KOH-resistant polymeric coating (ProTEK®). In this way, holey SiN membranes with side lengths ranging from 400 μm up to 2.4 mm were fabricated. Preliminary application specific experiments show the membranes’ suitability for microfiltration and stencil applications.

Gold nanodome-patterned microchips for intracellular surface-enhanced Raman spectroscopy

“…This selfassembly based lithographic technique is chosen because it allows for a relatively cheap, fast and reproducible nanopatterning. 42,43 Next, a periodic pattern of nanodomes is etched into the Si 3 N 4 substrate. 1(a) schematically shows the most important fabrication steps, which are described in detail in the ESI.…”

Freely suspended perforated polymer nanomembranes for protein separations

“…Various different approaches have been developed in the past decade to impart such nanoscale patterns to different materials. For instance, self-assembly of nanoparticles as templates 10 , 11 and self-organizing polymers 12 – 14 have been used to generate nanoscale patterns acting as processing masks to eventually generate perforations in thin sheets of material. While the geometries are excellently suited for separation of proteins and other biomolecules, these inorganic materials have the drawback of poor compatibility with biological fluids and the contained proteins.…”

Fabrication of Functional Plastic Parts Using Nanostructured Steel Mold Inserts

“…UV, X-ray, interference and e-beam lithography, when combined with other microfabrication processes such as thin film deposition and etching, have paved the way for the fabrication of nanostructured surfaces and devices [ 18 , 19 ]. Emerging bottom-up approaches such as block copolymer and nanosphere lithography have also appeared with the common goal of fabricating smaller structures [ 20 , 21 ]. These techniques are state of the art with regard to resolution, but they are limited to planar substrates and have mainly been applied to silicon-based materials.…”