SIPCO2: A simple, inexpensive surface water pCO₂ sensor

Abstract

Efforts to estimate air‐water carbon dioxide (CO2) exchange on regional or global scales are constrained by a lack of direct, continuous surface water CO2 observations. Sensor technology for the in situ measurement of the partial pressure of carbon dioxide (pCO2) has progressed, but still poses limitations including expense and biofouling concerns. We describe a simple, inexpensive, in situ pCO2 method (SIPCO2) in which a non‐dispersive infrared (NDIR) detector is paired with an air pump in an enclosed housing to produce air‐sea equilibration. We first evaluated this approach in a laboratory setting, then in an estuarine‐coastal ocean laboratory for several months to continuously monitor aquatic pCO2. An accepted, accurate NDIR‐based CO2 measurement technique was employed alongside SIPCO2 to provide an assessment of sensor performance. SIPCO2 allows for low‐cost, relatively accurate measurements of pCO2 (mean difference of −5 ± 5 μatm from validation system after laboratory calibration) without reagents or membranes, and can be assembled and operated with a minimal amount of technical skill. While not suitable for some exacting applications, this SIPCO2 approach could rapidly and effectively increase the number of quality CO2 observations in a range of aquatic environments. We also provide detailed instructions for the assembly of SIPCO2 from commercially available components.

Spatial variations in CO<sub>2</sub> fluxes in the Saguenay Fjord (Quebec, Canada) and results of a water mixing model

“…Relative standard deviations over this period were typically on the order of 0.2 to 6 % but were on the order of 0.1 % in a stable water mass at 220 m depth, implying that deviations recorded at the surface likely reflected natural variations over the period of sampling as the ship drifted with the current. The manufacturer claims a 1 % accuracy, but the performance of the instrument may be even better (Hunt et al, 2017).…”

Ocean Time Series Observations of Changing Marine Ecosystems: An Era of Integration, Synthesis, and Societal Applications

“…There is new technology similar to that used for O 2 optodes that could lead to simplified inorganic carbon sensors (Clarke et al, 2015(Clarke et al, , 2017. A variety of inexpensive and low-power infrared CO 2 sensors are also now being used for marine sensing applications (Fietzek et al, 2014;Bastviken et al, 2015;Hunt et al, 2017).…”

An Enhanced Ocean Acidification Observing Network: From People to Technology to Data Synthesis and Information Exchange

“…Promising new sensors for pH and pCO 2 are being developed based on optode time-resolved fluorescence technology similar to O 2 optodes (Clarke et al, 2015(Clarke et al, , 2017. Inexpensive, low-power infrared CO 2 sensors are now being used for oceanographic applications (Bastviken et al, 2015;Hunt et al, 2017). A miniature electrochemical sensor for combined measurements of pH and TA has recently been demonstrated (Briggs et al, 2017).…”