Small‐scale experimental study on the optimisation of a rooftop rainwater energy harvester using electromagnetic generators in light rains

Abstract

This research proposes a new rooftop rainwater energy harvester using electromagnetic generators, which demonstrates better rain-energy harvesting performance than the traditional rainwater energy harvesters that use electromagnetic generators under light rain conditions. Conventionally, the rainwater collected from the roof of a building or a residential attic using the installed roof gutter system is drained directly along a pipe to drive water turbines combined with electromagnetic generators for generating electricity. Such an energy harvesting method has high energy harvesting efficiency under heavy rain conditions but is inefficient under light rain conditions. To improve the energy harvesting efficiency in light rains, a pipe-connected tank including a passive rainwater buffer is introduced and fixed below the rooftop gutters in the proposed structure. The passive rainwater buffer is attached above the pipe-connected tank. After collecting a certain amount of rainwater from the gutters, the passive rainwater buffer automatically releases the rainwater periodically into the pipe-connected tanks. The released rainwater results in a large flow along the pipe, which can drive water turbines with electromagnetic generators to work at a high efficiency for a short period of time. A small-scale experimental prototype was built for validating the energy harvesting performance of the proposed structure. The results show that the intermittent highefficiency power generation of the proposed structure is better than the continuous low-efficiency power generation of the traditional structure during light rains. The proposed structure can charge a 680 μF capacitor with at least nine times the electrical energy that is stored in a conventional capacitor for a rainwater flow rate of less than 300 mL/min in the same amount of time. However, with the increase in the rainwater flow, the energy harvesting performance gap between the proposed structure and the traditional one gradually narrows.

Pengaruh Sudut Kemiringan Dan Jenis Material Atap Terhadap Tegangan Listrik Yang Dihasilkan Piezolektrik

“…Pemanenan energi dengan berbasis energi getaran menjadi tujuan utama, karena ketersediaan yang melimpah dari sumber energi berbasis getaran yang dapat dengan mudah didapatkan [3]. Pemanfaatan energi dari curah hujan dengan teknik pemanen energi telah menarik perhatian yang signifikan dalam beberapa tahun terakhir [4]. Dengan memanfaatkan energi alam dari curah hujan dapat menjadi energi terbarukan yaitu dengan cara memanfaatkan tekanan air hujan pada alat piezoelektrik [5].…”

Experimental Study on Hydroelectric Energy Harvester Based on a Hybrid Qiqi and Turbine Structure

“…In addition, the Qiqi structure, also as a bladeless rotating structure, has been used in different forms for small hydro energy harvesting applications in recent years [25,26]. The Qiqi structure is an ancient Chinese ceremonial utensil that can automatically overturn and spill its contents once it is full, thus symbolizing moderation and caution in Chinese culture.…”

Rainwater Pressure Electic Generator Model Using Piezoelectric

“…The electrical energy produced by piezoelectric will be higher if the rainfall and wind speeds are of great value (Zebua et al, 2019;Zhao et al, 2019). Rainfall and electrical energy produced by a piezoelectric circuit are directly proportional; the more significant the rainfall, the higher the pressure, and the greater the electrical energy (Ong et al, 2016;Bao & Wang, 2020). However, the electrical energy produced piezoelectric will be low if the rainfall activity is low (Wong et al, 2017).…”